489754
6
Zoom out
Zoom in
Previous page
1/64
Next page
6
USER MANUAL
GB
ruwido digital_3 Universal remote control
B. Setup of the STB, SAT and TV mode
1. Insert two new 1.5V AAA/LR03 batteries (correct position is indicated at the base
of the battery slot).
2. Switch on your device (to programme the remote control for the TV set, ensure that
the television shows a picture).
3. Look at your TV set and nd out which brand it is i.e. Mitsubishi, Sony, Panasonic
etc.
4. Look up the brand name in your code list section. You will nd one or more 3 digit
codes for your TV brand.
5. Press the TV key and keep it pressed until the green LED ashes twice in quick
succession (after approx. 3 seconds).
6. Within 10 seconds of seeing the 2 ashes above, enter the 3 digit code for your
device.
7. After you have entered the code the green LED will ash twice, indicating that the
code has been accepted by your ruwido digital_3 remote control. This does not
necessarily mean it is the correct code for your model of device.
8. Press the standby key to check whether your ruwido digital_3 remote control is
working properly. If your TV is thereby not set to standby mode, refer to the next
code in the list and repeat the programming procedure from step 3.
9. If your TV is set to standby check all other functions of the TV. If certain functions
are not available or not working properly, refer to the next code in the list and
repeat the programming procedure from step 3.
To program the STB mode please proceed as described in the programming
instructions for television sets, but instead of “TV” key use the “STB” key as
well as the codes from the STB section.
To program the SAT mode please proceed as described in the programming
instructions for television sets, but instead of “TV” key use the “SAT” key as
well as the codes from the SAT section.
C. Brand code scan
If the listed codes are not working or if the manufacturer of your device is not listed,
you have the option to search for a suitable code by means of the brand code scan.
1. Insert the batteries (correct position is indicated at the base of the battery slot).
2. Switch on your TV set.
3. Press the TV key and keep it pressed until the green LED ashes twice in quick
succession (after approx. 3 seconds).
4. Within the next 10 seconds enter the code 0 0 3, the green LED ashes twice
again.
5. Within the next 10 seconds enter the 3 digit brand code of your device, the green
LED ashes twice, in case a wrong code was entered the red LED lights up for two
seconds.
6. After the LED has ashed twice, press the Standby key and keep it pressed
until the device has switched off. During the code scan, the LED ashes every
2 seconds, this indicates that the automatic scan is in progress. After the device
has switched off, switch it on again to check the other functions of the device. If all
functions work as desired, press the “OK” key to save the found code.
7. If certain functions are not available or not working properly, repeat the code scan
procedure (steps 2 to 6) until you have found the best code.
BA V1 digital_3, 105x210 mm, 1c,6 6BA V1 digital_3, 105x210 mm, 1c,6 6 16.07.2008 19:14:5516.07.2008 19:14:55
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ruwido Digital 3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ruwido Digital 3 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info