489754

Ruwido Digital 3 Manual

4
Zoom out
Zoom in
Previous page
1/64
Next page
4
Congratulations on purchasing this high performance ruwido digital_3 remote control.
Great care has been taken of the design and manufacture of this product and in
normal use it will give many years of satisfying service. The following pages describe
how to get the best from your new remote control, but if in doubt please contact your
retailer.
About your ruwido digital_3 remote control
With your new ruwido digital_3 remote control you can not only control all functions of
your STB (including Freeview) or SAT receiver, but also the core functions of your TV
set.
How does the ruwido digital_3 remote control work?
By pressing any button on the remote control a command ist been sent to the device
being controlled, using an infrared beam. At the front of this command is a 3-digit
code, which is unique to that particular unit. This means that when you point a
controller at the TV, for example, the VCR will not respond!
The set-up of your remote control requires the programming of this unique 3-digit-
code.
The 10-second rule
The ruwido digital_3 remote control initially needs your assistance to work properly.
All programming is based on the 10-second rule: every step in these instructions must
be completed within 10 seconds after the previous step. Otherwise, the remote control
returns to standard operating mode. This rule ensures that your ruwido digital_3
remote control is not reprogrammed by another user by accident.
Inserting and changing the batteries
Your ruwido digital_3 remote control is powered by two alkaline 1.5 V batteries (IEC
LR 03, AAA). Wherever possible, ensure that new batteries are used.
Never mix old and new batteries together as this will effect the performance of the
remote control and shorten the battery life.
Please note:
Insert the batteries following the markings inside the battery compartment.
Immediately dispose of any leaking batteries.
Dispose old batteries as per manufacturer’s instruction.
Testing ruwido digital_3 remote control the for operation
Once the batteries have been inserted, press any button to ensure that the green LED
fl ashes; this confi rms correct insertion of the batteries. If for any reason there is no
response from the remote control please check the battery insertion or the condition
of the batteries. If during operation the operating range diminishes the batteries may
need to be replaced. Your ruwido digital_3 remote control has an inbuilt special feature
which allows you to change batteries without losing pre-programmed information. After
replacing the batteries all programmed functions will continue working as before.
USER MANUAL
GB
ruwido digital_3 Universal remote control
BA V1 digital_3, 105x210 mm, 1c,4 4BA V1 digital_3, 105x210 mm, 1c,4 4 16.07.2008 19:14:5516.07.2008 19:14:55
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ruwido Digital 3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ruwido Digital 3 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info