489906
11
Zoom out
Zoom in
Previous page
1/112
Next page
TROUBLESHOOTING AND SOLUTION
Effects
Causes Solutions
The motor will not start No power Make sure the unit is plugged in
Power cord, switch or Contact an authorised service centre
motor defective
The vacuum does Electronic module Contact an authorised service centre
not start automatically
Vacuum flow is insufficient Bag full Check the filter bag
One of the hoses or Check the flexible hose and the
accesso ries is clogged accessories
Clogged filters Check the filters cartridges
Dust from the exhaust (10) Filter cartridge torn ripped Contact an authorised service centre
Tools do not start 3-way switch malfunction Contact an authorised service centre
Insufficient Power for pneumatic tool Insufficient compressed air feeding Check air passage
Red indicator on Ordinary maintenance limit exceeded Contact an authorised service centre
Yellow indicator on (VERSION “E”) Max. liquid level exceeded Empty the bin
12
Filter replacement
Do not spread dust during filter replacement!
- Wear adequate filter mask;
- VERSION “M”: seal the dust container with the appropriate cap (33);
- detach the vacuum head pushing the side hooks (11) (pic.7-8);
- turn the vacuum head upside down (pic.15);
- remove the filter frame (21) turning the hooks (22) (pic. 16);
- remove the filter cartdridges (pic. 17) and fit them into a sealed disposal bag;
- fit new filter (cod. 036.1108) cartridges in the filter frame (pic.18) and reassemble it on the
vacuum head.
Use genuine RUPES spare parts only.
Refer to www.rupes.com for parts code and authorized service centre
RUPES Spa. will not be held responsible for direct or indirect damages resulting from
non-compliance with the requirements of this manual.
TOOL IDENTIFICATION PLATE
POSITION AND MEANING OF INFORMATION
1. Type of tool.
2. Nominal working voltage Volts (V).
3. Working frequency Hertz (Hz).
4. Class of protection.
5. Absorbed power Watt (W).
6. Power at socket (MAX) Watt (W).
7. Power max Watt (W).
8. Serial number.
9 . Read all this instructions before operating this product and save these in-
structions.
1 0 . At the end of its useful life, the product, pursuant to European Directive
2002/96/CE (WEEE) + 2003/108/CE and its implementation in national law, must not
be released into the environment or thrown away as domestic waste, but must be
disposed of at authorised recycling centres (contact the relevant local authorities
for a list of places where the product may be disposed of according to the law).
Disposing of the product correctly contributes to protecting human health and safe-
guarding the environment. Any illegitimate disposal of the product will be punishable
by law.
VERSIONS EL/EPL/EM/EPM
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rupes S145 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rupes S145 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info