489839

Rupes BH252R Manual

7
Zoom out
Zoom in
Previous page
1/28
Next page
7. INSERTING/REMOVING TOOLS
The tool holder 1 clamps drilling and chiselling
tools without a tool key.
INSERTING TOOLS
Before any work on the machine itself, pull
the mains plug!
Clean and lightly grease the tool shaft.
Pull back the unlocking collar 3. Insert the tool
while turning into the tool holder until it latches.
Release the unlocking collar. Check whether the
tool is firmly seated.
Take care that the dust protection cap 2 is not
damaged.
Replace damaged dust protection caps!
REMOVING TOOLS
Slide the unlocking collar 3 to the rear and pull
out the tool.
ADJUSTING THE CHISEL
Set the rotation stop switch 4 to an intermediate
position. The chisel can now be turned by hand
to the required working position.
Return the rotation stop switch 4 to the initial
position . The chisel latches automatically as
soon as it is radially loaded by the working or chi-
selling process.
8. DRILL CHUCK (ACCESSORY)
For drilling work in metal, wood and plastic with
drills that have normal shafts, a drill chuck (13
mm max. chuck opening) is available. The drill
chuck is mounted on the adapter (accessory) for
screwdriver bits. All common drill chucks with
1/2" x 20 UNF internal threads (13 mm max.
chuck opening) can be used.
MOUNTING THE CHUCK
Before any work on the machine itself, pull
the mains plug!
Clean the threads of the drill chuck (accessory)
and the adapter 13 (accessory).
Screw the drill chuck onto the adapter and lock
the adapter in the same manner as a drill in the
tool holder. To tighten the drill chuck, set the rota-
tion stop switch 4 temporarily to position
9. PRACTICAL TIPS
Do not drill into hidden electri-
cal lines or gas and water
pipes. Check the area to be
worked with a metal detector,
for example, before starting.
For metal, use only flawless, sharpened drills; for
stone and concrete, only masonry drills with hard
metal inserts.
Always adapt the speed to the material to be wor-
ked and the diameter of the drill. For precision
working with metal and wood, place the machine
in a drill stand (accessory).
IMPACT DRILLING -
CHISELING
Wear protective glasses and
hearing protection.
Do not apply to much pressure. The performance
is not increased in this manner.
The most effective method for chiselling is to
break out only small pieces of material.
When chiselling, work only with protective
glasses and the auxiliary handle 11. Check
before starting to work if the rotation stop
switch 4 is engaged in the position.
DRILLING IN TILES
Start drilling slowly on the tile. After the tile is dril-
led through, switch to impact drilling.
SCREWDRIVING
Screwdriver bits can be inserted into the adapter
13 (accessory). Commercially available bits with
a hexagonal dimension of 6.3 mm or 1/4" (DIN
3126, Form C) can be used.
The screwdriver bits are held in the adapter with
a spring ring. Therefore, use only bits with a
notch.
10. SLIP CLUTCH
If the drill becomes caught or jammed, the slip
clutch disengages.
Remove the load from the machine immediately
by pulling back the drill.
Always hold the machine firmly with both hands
and take a secure stance.
1
1. MAINTENANCE MEASURES
Before any work on the machine itself, pull
the mains plug!
Always keep the ventilation slots clean.
Wipe off the accessible plastic parts regularly
with a cloth without cleaning agent.
After heavy use over a long period, the machine
should be taken to a Rupes service location for
7
Fet
t
3
Fet
t
3
Fet
t
3
Fet
t
3
Fet
t
3
Fet
t
3
Fet
t
3
F
librettoBH252R 21-08-2007 9:30 Pagina 7
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rupes BH252R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rupes BH252R in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 3,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info