489839
5
Zoom out
Zoom in
Previous page
1/28
Next page
FORARE LE PIASTRELLE
Preforare delicatamente la piastrella ed inserire
la foratura a martello solo dopo aver perforato
completamente la piastrella.
AVVITARE
L’adattatore 13 (accessorio) può alloggiare bit
cacciaviti. Possono essere utilizzati bit cacciaviti
comunemente reperibili sul mercato e che abbia-
no un dado esagonale da 6,3 mm opp. 1/4" (DIN
3126, Forma C). I bit cacciaviti vengono tenuti
nell’adattatore tramite una rondella. Per questo
motivo, utilizzare soltanto bit che abbiano appo-
site tacche.
10. FRIZIONE
Se l’utensile di foratura si blocca oppure resta
incastrato, scatta la frizione di sicurezza.
Liberare immediatamente la macchina dal carico
tirando indietro la punta utensile.
Durante le operazioni di lavoro, tenere la macchi-
na sempre con entrambe le mani e provvedere
ad una sicura posizione di lavoro.
11. DISPOSIZIONI DI MANUTENZIONE
Prima di ogni intervento alla macchina, estrarre
la spina dalla prese di rete.
Mantenere sempre pulite le feritoie di ventilazio-
ne.
Pulire regolarmente con uno straccio e senza
detergenti, parti in materiale artificiale che siano
accessibili dall’esterno.
Dopo un periodo abbastanza lungo in cui la mac-
china sia stata soggetta a condizioni operative
estreme, sarà necessario affidare la macchina ad
un Centro di servizio Rupes perchè venga ese-
guita una ispezione ed una minuziosa pulizia.
12. MISURE ECOLOGICHE
Non gettare le apparecchia-
ture elettriche tra i rifiuti
domestici.
Recupero di materie prime,
piuttosto che smaltimento di
rifiuti.
Macchina, accessori ed imballaggio dovrebbero
essere inviati ad una riutilizzazione ecologica.
Queste istruzioni sono stampate su carta ricicla-
ta sbiancata senza cloro.
I componenti in plastica sono contrassegnati
per il riciclaggio selezionato.
PNEUMATIC DRILL HAMMER BH252R
(SEE FIGURES IN PAGES 25-26)
Application
The Pneumatic Drill Hammer can be used univer-
sally for impact drilling, for light chiselling work in
masonry and for drilling as well as screwdriving in
wood, metal and plastic.
1. SAFETY INSTRUCTIONS AND ACCIDENT
PREVENTION
Before putting the machine into operation, read
through these operating instructions completely
and observe the safety instructions contained
therein as well as those in the enclosed booklet
on general safety instructions for electro-tools.
If the mains cable is damaged while working,
pull the mains plug immediately.
Never work with a damaged mains cable.
Wear protective glasses, hearing protection,
protective gloves and sturdy shoes.
Wear hearing protection. Exposure to noise
can cause hearing loss.
Use the auxiliary handles supplied with
the machine. Loss of control can cause per-
sonal inj ury.
Do not work with materials containing asbe-
stos.
Do not carry the machine by the cable.
The mains receptacles in the working area
must be protected by a residual current circuit
breaker (RC).
For the attachment of identification markings
on the machine, do not drill into the housing.
The protective insulation would be shorted.
Use stickers.
When the drill unexpectedly jams, the machi-
ne kicks back. Therefore, always take a secu-
re stance and hold the machine firmly with
both hands.
2. ILLUSTRATION
1
Tool holder
2 Dust protection cap
3 Unlocking collar
4 Rotation stop switch
5 V
entilation slots
6 Rotational direction switch
7 Locking button for on/off switch
8 On/Off switch/Speed control
9 Drilling/Impact drilling selector
10 Holder for depth stop
11 Auxiliary handle
5
English
Fet
t
3
Fet
t
3
Fet
t
3
Fet
t
3
Fet
t
3
Fet
t
3
Fet
t
3
Fet
t
3
Fet
t
3
Fet
t
3
librettoBH252R 21-08-2007 9:30 Pagina 5
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rupes BH252R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rupes BH252R in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 3,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info