656085
33
Zoom out
Zoom in
Previous page
1/50
Next page
32
ROTWILD USER MANUAL
crossed by hand, in order to achieve
a possible even division of the screw
strength. After the handlebars have
been secured use the torque spanner –
clamping torque 6 Nm.
Control: Grip the brake handle from
above. The fixation is correct when you
can no longer twist the handlebars up
or down.
Handlebar height
In order to adjust the handlebar height
one has the possibility on the one hand
to diversify the Spacer number which is
to be found under the stem, or on the
other hand to turn the mounting stem.
The mounted stem on your ROTWILD
road bike features an inclination and
can, as well as facing downwards (spor-
tive deep sitting position), be mounted
facing upwards (comfortable siting
position).
It is necessary to disassemble the
complete stem handlebars device in
order to position the handlebars height.
Please contact a qualified dealer’s
workshop. A crash or accident could
occur due to faulty mounting of the
stem-handlebars device, in which you
and/or others could come to harm.
Angle of handlebar
To set the angle of the handlebar, the
clamp screws on the handlebar stem
have to be loosened slightly and the
handlebar turned into the right positi-
on. The ideal riding position is when
your hands rest casually on the brake
lever unit in the riding position. Please
always make sure that you refasten the
clamping screws after setting the angle
of the handles, using the torque wrench
– fastening torque 6 Nm. Follow the
instructions above.
Before fastening the handles again,
please make sure that it is clamped
exactly in the centre of the handlebar
stem. Fasten the screw connections on
the handles securely – take care that
you do this evenly so that the clamp
openings at the top and bottom are
the same. Use a torque wrench for this
purpose. Fastening torque 6 Nm.
If you find during your first test ride that
the turning of the handlebar stem or
handles is not ideal, repeat the procedu-
re described above.
Falls or accidents
Please note that handlebars and stems
are essential parts of bicycle construc-
tion. Any modifications to these parts may
endanger your safety. Be sure to use the
correct torque when tightening screws.
The wrong torque could result in parts
working loose or breaking during a ride.
This can lead to serious accidents.
Potential accident risk
To avoid losing control of your bike and
GETTING READYV
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rotwild Road 2016 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rotwild Road 2016 in the language / languages: English, German as an attachment in your email.

The manual is 9,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info