656097

Rotwild Road 2015 Manual

38
Zoom out
Zoom in
Previous page
1/50
Next page
37
ROTWILD USER MANUAL
mark indicating this point may not be
visible, if this is the case, the seat tube
or seat post may break while riding.
• Before you take your place in the
saddle, make sure that the seat post is
securely xed. Stand next to your bike
and try to twist the seat post. If the
seat post rotates, increase the tension
on the quick-releases until the seat
post is secure.
• Turn the crank until the pedal is loca-
ted at its lowest position.
• Take your place in the saddle and put
your heel on the pedal. The saddle
is correctly adjusted when your leg is
stretched straight in this position.
• Check the stretch of your leg by setting
the ball of your foot on the pedal. Your
leg should now be slightly bent.
Note
The saddle tube is not allowed to be
rubbed down or otherwise mechanically
worked. The minimum insertion depth for
the saddle tube averages 90 mm.
Saddle position – adjusting the angle
• Make the adjustments on a level sur-
face.
• Loosen the both retaining screws of the
seat post with the help of a tting allen
key. Turn the screws a maximum of 2
turns anti-clockwise.
• You can now adjust the horizontal posi-
tion of the saddle and its angle.
• When tightening the retaining screws,
make sure that the front tip of the
saddle has only a minimal dip towards
the front to ensure that the genital area
is not unnecessarily stressed while
cycling.
• Tighten theretaining screws with the
appropriate torque (10 Nm).
• Stand to one side of the bike and check
from above whether the saddle rocks by
alternately applying pressure to the tip
and the rear of the saddle. The position
of the saddle should not change.
Saddle replacement
Should you be considering replacing the
standard saddle, please note that the seat
post is intended for a saddle rail diameter
of 7 mm. Other rails may lead to failure of
the post and serious falls.
Always use a torque wrench.
Torque 10 Nm.
DETAILED OPERATING INSTRUCTIONS  SEAT POSITION
… 38 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rotwild Road 2015 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rotwild Road 2015 in the language / languages: English, German as an attachment in your email.

The manual is 3,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info