581051
13
Zoom out
Zoom in
Previous page
1/16
Next page
13
PC-USB Input
y
See Figure 5
Connect this input using the supplied USB cable to the PC-USB socket of
your computer.
NOTE: You may need to install the USB driver located on the CD supplied
with the RC-1570 onto your computer to allow it to send audio to the
RC-1570 via USB. Please see the included „PC-USB Windows Driver
Instructions„ for more detail.
NOTE: Upon successful installation of the driver, you may need to select
the ROTEL audio driver from the audio/speaker setup of your computer.
Settings Menu
You can access the settings menu from the front panel by pressing the MENU
8
button or the MENU D button on the remote. You can change the value
of the selected option by pressing the +/- key on the front panel or LEFT/
RIGHT E key on the remote. Step through the sub-menus by pressing the
MENU
8
key on the front panel or MENU D button on the remote.
Ć Tone Control: TONE BYPASS ON/OFF, BASS level and TREBLE levels
can be changed to desired settings. Press the ENTER key on the front panel
or ENT on the remote to toggle between the tone setup options. (For more
information on Tone Control refer to the Tone Control Bypass, Bass and
Treble control sections)
NOTE: These settings are stored permanently even after the RC-1570
is powered off.
Ć BALANCE: Change left/right balance (For more information on Balance
sections)
NOTE: These settings are stored permanently even after the RC-1570
is powered off.
Ć DIMMER: Dims the display in 7 steps.
NOTE: These settings are stored permanently even after the RC-1570
is powered off.
Ć ROTEL LINK RCD, selects how the CD player is connected to the amplifier,
either CD (analog), COAX1 or COAX2. CD is the factory default.
Ć POWER ON MAX VOLUME: This sets the maximum volume level when
the unit is turned ON. „45‰ is the factory default.
NOTE: Power On Max Volume settings do not apply to sources configured
with Fixed Gain.
Ć Fixed Gain: Configures a Fixed Volume level for a specified input. To
enable this feature press the +/- keys to select the desired fixed volume level
for Aux 1, Coax 1, Coax 2, Optical 1, Optical 2, PC-USB or Bluetooth.
When enabled and the input with a Fixed Volume is selected, the Volume
level will immediately be set to the specified level.
Valid settings include: VARIABLE, FIXED 1-95, FIXED MAX.
NOTE: The Volume knob on the front panel and Volume +/- keys on
the IR remote are disabled when the volume is Fixed. To disable this
feature set the Fixed Volume level to „Variable‰.
Ć AUX1 VOL: VARIABLE (disabled) is factory default.
Ć COAX1 VOL: VARIABLE (disabled) is factory default.
Ć COAX2 VOL: VARIABLE (disabled) is factory default.
Ć OPT1 VOL: VARIABLE (disabled) is factory default.
Ć OPT2 VOL: VARIABLE (disabled) is factory default.
Ć PC-USB VOL: VARIABLE (disabled) is factory default.
Ć BLUETOOTH VOL: VARIABLE (disabled) is factory default.
Ć PC-USB AUDIO CLASS: Change supported PC-USB Audio Class of the
attached device.
NOTE: Some computers attached to the PC-USB do not support USB Audio
Class 2.0 and do not support 24/192 audio playback. If needed the PC-USB
can be configured for USB Audio Class 1.0. Please consult your computer
operating system for details.
Ć Software Version : This shows the current software version loaded into
the amplifier.
Ć FACTORY DEFAULT: This sets the unit back to the original state as when it
left the factory. Press the + key on the front panel or Right key on the remote
control to select <YES> then press the „ENTER‰ key on the front panel or
„ENT‰ on the remote control.
NOTE: All previously configured options will be erased and reset to the
factory default settings.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rotel RC-1570B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rotel RC-1570B in the language / languages: English as an attachment in your email.

The manual is 1,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info