712108
7
Zoom out
Zoom in
Previous page
1/10
Next page
12 13
AUSCULTATION Mode:
with
Stethoscope
Measurement Procedures
Here are a few helpful tips to help you obtain more accurate readings:
Blood pressure changes with every heartbeat and is in constant uctuation through-
out the day.
Blood pressure recording can be aected by the position of the user, his or her physi-
ological condition and other factors. For greatest accuracy, wait one hour after ex-
ercising, bathing, eating, drinking beverages with alcohol or caeine, or smoking to
measure blood pressure.
Before measurement, it’s suggested that you sit quietly for at least 5 minutes as
measurement taken during a relaxed state will have greater accuracy. You should
not be physically tired or exhausted while taking a measurement.
Do not take measurements if you are under stress or tension.
Sit upright in a chair, and take 5-6 deep breaths. Avoid leaning back while the meas-
urement is being taken.
Do not cross the legs while sitting and keep the feet at on the oor during meas-
urement.
During measurement, do not talk or move your arm or hand muscles.
Take your blood pressure at normal body temperature. If you are feeling cold or hot,
wait a while before taking a measurement.
If the monitor is stored at very low temperature (near freezing), have it placed at a
warm location for at least one hour before using it.
Wait 5 minutes before taking the next measurement.
1. Press the Auto/Auscultation switching key to select Auto mode or Auscultation
mode. After a measuring mode is selected, press the ON/OFF/START key to reset
the monitor so it can start measurement in the chosen measuring mode.
2. Press the ON/OFF/START key. All digits will light up, checking the display functions.
The checking procedure will be completed in 2 seconds.
4. Auto Mode
• In Auto mode, “Auto” mark appears on the display.
The unit will automatically inate to the appropriate ina-
tion level based on the user’s pulse oscillations.
When the measurement is completed, the cu will ex-
haust the pressure inside. Systolic, diastolic and pulse will
be shown simultaneously and be saved automatically into
memory zone.
In order to enhance the probability of pulse arrhythmia
detection by the PARR technology, measurement repeti-
tions are recommended.
5. Auscultation Mode
In Auscultation Mode, “Auscultation” mark appears on the
display.
The unit will automatically inate to the appropriate ina-
tion level based on the user’s pulse oscillations.
While the unit starts deating, press the MARKER key to re-
cord the onset of Korotko sound as the systolic pressure,
and press the MARKER key again to record the disappear-
ance of the Korotko sound as diastolic pressure.
When the measurement is completed, the cu will exhaust the pressure inside.
Systolic pressure and diastolic pressure will be showed simultaneously on the LCD
screen.
Korotko sound of
Systolic pressure
Korotko sound of
Diastolic pressure
3. After all symbols appear, the display will show a blinking “0”. The monitor is ready to
measure and will automatically inate the cu slowly to start measurement.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rossmax X9 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rossmax X9 in the language / languages: English as an attachment in your email.

The manual is 7,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Rossmax X9

Rossmax X9 User Manual - Dutch - 13 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info