712108
5
Zoom out
Zoom in
Previous page
1/10
Next page
8 9
Loose Cu Detection
If the cu was applied too loosely, it may cause unreliable measurement results or
measurements can fail to start. The “Loose Cu Detection” can help to determine if
the cu is wrapped snugly enough. The specied icon
appears once a “loosen
cu” has been detected during measurement. Otherwise the specied icon ap-
pears if the cu is wrapped correctly during measurement.
Movement Detection
The “Movement Detection” helps reminding the user to remain still and is indicat-
ing any adverse body movement during measurement. The specied icon appears
once a “body movement” has been detected during and after such a measurement.
Note: It’s highly recommended that you measure again if the icon
appears.
Hypertension Risk Indication (HRI)
The World Health Organization, classifying blood pressure ranges into 6 grades. This
unit is equipped with an innovative blood pressure risk indication, which visually indi-
cates the assumed risk level (optimal / normal / high-normal/ grade1 hypertension /
grade 2 hypertension / grade 3 hypertension) of your result, making the meaning of
your ndings comprehensive.
Error Codes for your reference
EE / Measurement Error: Make sure the L-plug is securely connected to the air
socket and calmly measure again. Wrap the cu correctly around your arm and keep
arm steady during measurement. If the error keeps occurring, return the device to
your local distributor or service centre.
E1 / Air Circuit Abnormality: Make sure the L-Plug is securely connected to the
air socket on the side of the unit and calmly measure again. If the errors still occur,
return the device to your local distributor or service centre for help.
E2 / Pressure Exceeding 300 mmHg: Switch the unit o and measure again qui-
etly. If the error keeps occurring, return the device to your local distributor or service
centre.
E3 / Data Error: Remove the batteries, wait for 60 seconds, and reload. If the error
keeps occurring, return the device to your local distributor or service centre.
Er / Exceeding Measurement Range: Measure again quietly. If the error keeps
occurring, return the device to your local distributor or service centre.
Using the AC Adaptor (Optional)
1. Connect the AC adaptor with the AC adaptor
jack on the right side of the unit.
2. Plug the AC adaptor into the socket. (AC adap-
tors with required voltage and current indicated
near the AC adaptor jack.)
Caution:
1. Please unload the batteries when operating with the AC mode
for a longer period of time . Leaving the batteries in the com-
partment for a long time may cause leakage, which may lead to damage of the
unit.
2. No batteries are needed when operating with the AC mode.
3. AC adaptors are optional. Please contact the distributor for the compatible AC
adaptors.
4. Use only the authorized AC Adaptor with this blood pressure monitor. Information
for the authorized AC adaptor, please refer to APPENDIX 1.
AC Adaptor
(Ø4.0 / Ø1.7)
Installing Batteries
1. Press down and lift the battery cover in the direction of the arrow to open the bat-
tery compartment.
2. Install or replace 4 “AA” sized alkaline batteries in the battery compartment accord-
ing to the indications inside the compartment.
3. Replace the battery cover by clicking in the bottom hooks rst, then push in the top
end of the battery cover.
4. Replace the batteries in pairs. Remove batteries when unit is not in use for extended
periods of time.
You need to replace the batteries when
1. low battery icon appears on display.
2. the ON/OFF/START key is pressed and nothing appears on display.
Caution:
1. Batteries are hazardous waste. Do not dispose them together with the household
garbage.
2. There are no user serviceable parts inside. Batteries or damage from old batteries
are not covered by warranty.
3. Use exclusively brand batteries. Always replace with new batteries together. Use
batteries of the same brand and same type.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rossmax X9 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rossmax X9 in the language / languages: English as an attachment in your email.

The manual is 7,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Rossmax X9

Rossmax X9 User Manual - Dutch - 13 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info