712108
8
Zoom out
Zoom in
Previous page
1/10
Next page
14 15
Time Adjustment
1. To adjust the date/time in the monitor after installing or replaces batteries. The
display will show a blinking number showing the year.
2. Change the year by pressing the Memory key, each press will increase the number.
Press the ON/OFF/START key to conrm the entry and the screen will show a blink-
ing number representing the date.
3. Change the date, the hour and the minute as described in Step 2 above, using the
Memory key to change and the ON/OFF/START key to conrm the entries.
4. “0” will reappear as the Blood Pressure Monitor is ready for measurement again.
Recalling Values from Memory
1. Press the Memory key to view the last previously stored measurement. Every meas-
urement comes with a assigned memory sequence number.
2. The memory bank can store up to 90 readings under Auto mode. The number of
readings exceeds 90, the oldest data will be replaced with the new record.
Clearing Values from Memory
Under Auto mode, press and hold the Memory key for approximately 5 seconds, then
the data can be erased automatically.
Data Transfer to PC
Rossmax provides a free, integrated and user-friendly blood pressure management
software which can be downloaded and installed on your computer. You may pur-
chase a special designed USB cable in order to connect Rossmax’s blood pressure
monitor and your PC. Please visit the website at http://www.rossmax.com for pro-
ceeding the downloading and installation process.
adjust
“Year”
adjust “Month”
& “Date”
adjust “Hour”
& “Minute”
Cautionary Notes
1. The unit contains high-precision assemblies. Therefore, avoid extreme temperatures,
humidity, and direct sunlight. Avoid dropping or strongly shocking the main unit, and
protect it from dust.
2. Clean the blood pressure monitor body and the cu carefully with a slightly damp, soft
cloth. Do not press. Do not wash the cu or use chemical cleaner on it. Never use thin-
ner, alcohol or petrol (gasoline) as cleaner.
3. Leaky batteries can damage the unit. Remove the batteries when the unit is not used
for a long time.
4. The unit should not be operated by children so to avoid hazardous situations.
5. If the unit is stored near freezing, allow it to acclimate at room temperature before use.
6. This unit is not eld serviceable. You should not use any tool to open the device nor
should you attempt to adjust anything inside the device. If you have any problems,
please contact the store or the doctor from whom you purchased this unit or please
contact Rossmax International Ltd.
7. As a common issue for all blood pressure monitors using the oscillometric measure-
ment function, the device may have diculty in determining the proper blood pressure
for users diagnosed with diabetes, poor circulation of blood, kidney problems, or for
users suered from stroke, or for unconscious users.
8. This unit is able to detect common arrhythmia (atrial or ventricular premature beats or
atrial brillation). The ARR, AFib and PC icons are displayed after the measurement if
Atrial Fibrillation and Premature Contraction was detected during the measurement. If
ARR, AFib or PC icons are displayed, you are advised to wait for a while and take another
measurement. It is strongly recommended that you consult your physician if the ARR,
AFib or PC icons appear often.
Troubleshooting
If any abnormality will arise during use, please check the following points.
Symptoms Check Points Correction
No display when the
ON/OFF/START key
is pressed
Have the batteries run down?
Replace them with four new
batteries.
Have the batteries' polarities
been positioned incorrectly?
Re-insert the batteries in the
correct positions.
EE mark shown on
display or the blood
pressure value is dis-
played excessively
low (high)
Is the cuff placed correctly?
Wrap the cuff properly so
that it is positioned correctly.
Did you talk or move during
measurement?
Measure again. Keep wrist
steady during measurement.
Did you vigorously shake the
cuff during measurement?
Note: If the unit still does not work, return it to your dealer. Under no circumstance
should you disassemble and repair the unit by yourself.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rossmax X9 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rossmax X9 in the language / languages: English as an attachment in your email.

The manual is 7,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Rossmax X9

Rossmax X9 User Manual - Dutch - 13 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info