638836
11
Zoom out
Zoom in
Previous page
1/32
Next page
11
The device has a safety switch. This is located inside the motor unit
and is activated by a pin on the mixing container lid. The device can only
be switch on using the On/Off switch if the mixing container lid is placed on
correctly and the pin activates the safety switch!
If the device won’t turn on, push the front of the bin and double check the lid
to make sure it is snapped in place and secured.
Using the Pasta Maker
CAUTION!
Only connect the device to a socket that is properly installed, is easily
accessible and corresponds to the technical data of the device.
Always assemble the device in full before you plug it in.
The device has a safety switch. It is located inside the motor unit and
is activated by a pin on the mixing container lid. The device can only
be switched on using the On/Off switch if the mixing container lid is
placed on correctly and the pin activates the safety switch. If the pin
on the mixing container lid is damaged, do not attempt to activate the
safety switch or bypass/repair it using your own hands. In the event of a
defect, contact the customer service department. Stop using the device
until it has been repaired.
Make sure that the On/Off switch is in the OFF position before you
connect the device to the mains power.
Do not overfill the mixing container! Excessively large quantities of
ingredients may cause damage to the device. Larger quantities should
be spread between two or more kneading operations. While you can mix
up to 3 cups of flour, we recommend doing 2 cups at a time.
Do not operate the device for more than 15 minutes without interruption!
Operating the device continuously for too long may cause damage to
the device. Switch the device off after 15 minutes and let it cool down
for a few minutes before you switch it back on again.
If dough gets stuck during kneading or the kneading spiral does not
rotate evenly, never attempt to reach through the slot-shaped openings
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ronco Pasta Maker at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ronco Pasta Maker in the language / languages: English as an attachment in your email.

The manual is 0,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info