714264
27
Zoom out
Zoom in
Previous page
1/32
Next page
27
Stopping the appliance
Pay attention during operation that both collection containers and the strainer do not
overflow.
Press the START/PAUSE button to stop the appliance.
The pilot lamp flashes slowly in red.
The appliance can be restarted by pressing the START/PAUSE button again.
NOTE: If the appliance is not restarted within 5 minutes after switching
off, it is switched off automatically.
Switching the appliance off
If the material has been processed and hopper and screw conveyor are
empty, the appliance switches of automatically.
The pilot lamp flashes slowly in red.
Press the ON/OFF button to switch off the appliance.
NOTE: If you do not switch off the appliance within 5 minutes by pressing
the ON/OFF button, it switches off automatically, as soon as there is not
enough material in the screw conveyor.
Unplug the appliance after each use to switch it off permanently!
C.) Clearing a screw conveyor blockage
It is possible that material which is too large, too hard or too moist blocks, jams or gets stuck in the
screw conveyor during processing. If there is a blockage in the screw conveyor, it stops automatically.
If the outlet of the seed container is blocked due to material which is too large, the screw conveyor is
still running. However, no oil or oil press cake is produced.
To clear a blockage in the outlet of the seed container, unplug the appliance and tilt it. Fill the material
to be pressed in a suitable container. Crush the pieces which are too large before you press them again.
In case of a blockage in the screw conveyor, press the Reverse function
button for at least 5 seconds. The appliance starts and the screw conveyor
turns now anticlockwise. The blockage is possibly cleared. Keep the button
pressed during operation. Do not worry if the appliance causes loud
creaking noises. This is harmless.
The pilot lamp flashes quickly in green.
If you release the ON/OFF button, the appliance stops again.
Then, you can start the appliance by pressing START/PAUSE to check
whether the blockage is cleared.
If the blockage cannot be cleared this way, unplug the appliance and
remove the material to be pressed as described above. Open then the
screw conveyor casing, disassemble the screw conveyor and clean it.
Examine the material for foreign matters (see section on “Disassembling
and assembling the appliance”).
If the blockage is cleared, you can continue processing.
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rommelsbacher OP700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rommelsbacher OP700 in the language / languages: English, German as an attachment in your email.

The manual is 2,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info