712124
42
Zoom out
Zoom in
Previous page
1/48
Next page
42
Step 13:
Choose the function
“espresso/hot water”.
Step 14:
Switch the appliance on.
The appliance heats up and the pilot
lamp glows red permanently.
When the pilot lamp glows blue, the
appliance is ready for use.
Step 15:
Continue the descaling process by
turning the rotary knob to the right.
Dispense decalcifier for15 seconds.
Step 16:
Stop the supply.
Turn the rotary knob to the left.
Step 17:
Switch the appliance off.
Step 18:
Remove the vessel.
Step 19:
Remove the portafilter.
Attention, the portafilter drips
slightly.
Step 20:
Remove the water tank.
Step 21:
Empty the water tank and clean it
thoroughly.
Step 22:
Fill the water tank with fresh tap
water.
Observe the “MAX” marking!
Step 23:
Insert the water tank.
Make sure the water tank is inserted
as far as it will go on the gasket.
Step 24:
Position the portafilter without filter
insert at the marking of the brew
head and lock it by turning it to the
right as far as it will go.
Step 25:
Place a vessel below the outlet of
the portafilter.
Step 26:
Choose the function
“espresso/hot water”.
Step 27:
Switch the appliance on.
The appliance heats up and the pilot
lamp glows red permanently.
When the pilot lamp glows blue, the
appliance is ready for use.
CONTINUED ON
NEXT PAGE
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rommelsbacher EKS 2010 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rommelsbacher EKS 2010 in the language / languages: English, German as an attachment in your email.

The manual is 2,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info