712124

Rommelsbacher EKS 2010 Manual

41
Zoom out
Zoom in
Previous page
1/48
Next page
41
Step 1:
Remove the water tank
(previously remove the portafilter if
necessary).
Step 2:
Remove filter cartridge.
Step 6:
Place a vessel below the outlet of
the portafilter.
Step 3:
Fill decalcifier in the water tank.
Observe the “MAX” marking!
Step 4:
Insert the water tank.
Make sure the water tank is inserted
as far as it will go on the gasket.
Step 5:
Position the portafilter without filter
insert at the marking of the brew
head and lock it by turning it to the
right as far as it will go.
Step 7:
Choose the function
“espresso/hot water”.
Step 8:
Switch the appliance on.
The appliance heats up and the pilot
lamp glows red permanently.
When the pilot lamp glows blue, the
appliance is ready for use.
Step 9:
Start descaling by tipping the switch
for 2 cups shortly. The appliance
stops automatically afterwards.
Repeat this process several times
until ca. 1/3 of the decalcifier has
flown through.
Step 11:
Repeat step 7 – 10 twice.
Check the collecting vessel regularly,
empty it if necessary.
Step 10:
Switch the appliance off.
Wait for 8 – 10 minutes so that the
decalcifier can soak.
Step 12:
Place a collecting vessel below the
outlet of the hot water/steam nozzle.
… 41 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rommelsbacher EKS 2010 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rommelsbacher EKS 2010 in the language / languages: English, German as an attachment in your email.

The manual is 2,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info