713991
24
Zoom out
Zoom in
Previous page
1/32
Next page
24
Portion-controlled grinding (with scale function)
Select the corresponding function with the button “Menu“. Pressing the
button is confi rmed with a signal tone.
Press the button several times if necessary to fi nd the desired function.
Place the supplied powder container resp. another suitable container on the
scale plate. If the display shows the symbol for “tare-setting”, the container
must be re-adjusted. (See page 22) “Checking resp. re-setting the tare weight“).
The display shows the symbol for “portion-controlled grinding“.
Default setting is “2“ cups (for each cup, 7 g powder are pre-set).
Press the button “-“ to reduce the number of cups to 1 cup.
Press the button “+“ to increase the number of cups up to 12 cups.
To start, press the button “On/Off“.
If you select 4 cups e.g., the display shows “0/1/2/3/4“ in the same order.
After the grinding process, the appliance stops automatically. This is indicated
by a multiple beep and the display shows the selected number of cups.
NOTE: Press the button “On/Off“ once again to stop the grinding process at
any time.
For a permanent and safe switch-off, always disconnect the mains plug from
the socket after every use!
Time-controlled grinding (without scale function)
Select the corresponding function with the button “Menu“. Pressing the
button is confi rmed with a signal tone.
Press the button several times if necessary to fi nd the desired function.
Place the supplied powder container resp. another suitable container on the
scale plate.
The display shows the symbol for “time-controlled grinding“.
Default setting is “15“ seconds.
Press the button “-“ to reduce the time to 1 seconds.
Press the button “+“ to increase the time up to 60 seconds.
To start, press the button “On/Off“.
If you select 20 seconds e.g., the display shows “20/19/18/…/3/2/1/0“ in the
same order.
After the grinding process, the appliance stops automatically. This is indicated
by a multiple beep and the display shows the selected time.
NOTE: Press the button “On/Off“ once again to stop the grinding process at
any time.
For a permanent and safe switch-off, always disconnect the mains plug from
the socket after every use!
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rommelsbacher EKM500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rommelsbacher EKM500 in the language / languages: English, German as an attachment in your email.

The manual is 3,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info