713991
25
Zoom out
Zoom in
Previous page
1/32
Next page
25
Weight-controlled grinding (with scale function)
Select the corresponding function with the button “Menu“. Pressing the
button is confi rmed with a signal tone.
Press the button several times if necessary to fi nd the desired function.
Place the supplied powder container resp. another suitable container on the
scale plate. If the display shows the symbol for “tare-setting”, the container
must be re-adjusted. (See page 22) “Checking resp. re-setting the tare weight“).
The display shows the symbol for “weight-controlled grinding“.
Default setting is “15“ grams.
Press the button “-“ to reduce the weight to 3 grams.
Press the button “+“ to increase the weight up to 100 grams.
To start, press the button “On/Off“.
If you select 30 grams e.g., the display shows “0/1/2/3/…/28/29/30“ in the
same order.
After the grinding process, the appliance stops automatically. This is indicated
by a multiple beep and the display shows the selected time.
NOTE: Press the button “On/Off“ once again to stop the grinding process at
any time.
For a permanent and safe switch-off, always disconnect the mains plug from
the socket after every use!
Manual grinding (without scale-function)
Select the corresponding function with the button “Menu“. Pressing the
button is confi rmed with a signal tone.
Press the button several times if necessary to fi nd the desired function.
Place the supplied powder container resp. another suitable container on the
scale plate. You can also place the portafi lter of another espresso machine
below the powder outlet.
TIP: For a better handling, you may assemble the enclosed holder for a
portafi lter with 60 mm Ø. (See page 27 „Assembling / disassembling the
holder for portafi lter“).
The display shows the symbol for “manual grinding“.
Default setting is “0“ seconds.
To start, press the button “On/Off“.
For the time of the grinding process, the display shows “1/2/3/4/…/58/59/60”
in the same order.
To terminate the grinding process, press the button “On/Off“ once again.
The display shows “0”.
If the grinding process is not terminated manually, the appliance stops
automatically after 60 seconds. This is indicated by a multiple beep and the
display shows “0”.
For a permanent and safe switch-off, always disconnect the mains plug from
the socket after every use!
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rommelsbacher EKM500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rommelsbacher EKM500 in the language / languages: English, German as an attachment in your email.

The manual is 3,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info