713991

Rommelsbacher EKM500 Manual

22
Zoom out
Zoom in
Previous page
1/32
Next page
22
Setting the grinding degree
Integrated scale
• Different coffee beverages also require a different grinding degree; but also the type and roasting of the
beans as well as your personal taste make the decision on how fi nely the coffee powder needs to be
ground. Take our recommendations (see below) as a basis and just try it out yourself until you have found
your individually matching grinding degree by means of the very variable setting options.
setting application
1 – 10
• extra-fi nely ground powder is recommended for automatic pump pressure
espresso machines.
10 – 20
• fi nely ground powder is suitable for fi lter coffee machines and for hand
brewed coffee.
20 – 30
• medium ground powder is used in conventional automatic boiler espresso
machines and espresso makers.
30 – 39 • coarsely ground powder is suitable for piston pump coffee makers (”French Press“).
• By turning the setting ring below the beans container to the right or to the left, the grinding degree can be
individually adjusted.
• Setting “1“ means extra-fi ne powder, setting “39“ very coarsely ground powder.
• The appliance is equipped with a scale. With the integrated scale you can grind coffee powder from
whole beans accurately weighed-to-the gram.
• In factory setting, the scale is adjusted so that the supplied powder container with fi tted cover
corresponds to the tare weight “0-position” on the scale.
• Of course, you can also put another container (e.g. a coffee fi lter for hand-made coffee) on the
scale and have the coffee powder ground directly into this container. In this case, the tare weight
(”0”-position) has to be adjusted to the corresponding container.
• In order to guarantee a proper function of the scale it is necessary to place the appliance on an even
surface and that the appliance does not wobble during operation.
NOTE: The scale only works with the functions “portion-controlled” and “weight-controlled” grinding.
The maximum load of the scale is 3 kg.
Checking or re-setting the tare weight („0“-position)
• Place an empty container (e.g. the supplied powder container with fi tted cover) on the scale plate.
• When the display shows
• Place an empty container (e.g. the supplied powder container with fi tted cover) on the scale plate.
, the scale must be set to the new tare weight.
• To do so, press the button
. Pressing the button is confi rmed with a signal tone.
• The display shows
one after the other. As soon as the display has extinguished, the container
on the scale disk is adjusted as tare weight.
… 22 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rommelsbacher EKM500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rommelsbacher EKM500 in the language / languages: English, German as an attachment in your email.

The manual is 3,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info