714009

Rommelsbacher CT2010IN Manual

21
Zoom out
Zoom in
Previous page
1/28
Next page
21
Getting acquainted with your appliance
Touch control sensors
The appliance is equipped with touch control sensors which grant an easy and convenient handling.
• Touching the sensor with your finger activates the
relevant function and an acoustic acknowledgement
signal.
NOTE: Always keep the control panel clean and dry.
Do not touch it with fingers wet and do not use it as a
shelf of deposit as this might lead to malfunctions.
Residual heat indicator
Each cooking zone is equipped with a residual heat indicator which shows whether the cooking
zone is still hot.
• If the temperature of the cooking zone
has reached a value of more than 80 °C
due to the waste heat emitted by the pot,
the LED “heat” (8a) will glow.
• As soon as the temperature has dropped
below 80 °C or the appliance is discon-
nected from the mains, the LED “heat”
(8a) goes out.
Pot recognition
Each cooking zone features a sensor which recognizes whether there is a vessel on the cooking zone.
• If no suitable vessel is recognized on the
cooking zone after switch-on, the display
(4) will show “E0” and an alternate
warning signal will sound.
If no pot is recognized within 45 seconds,
the appliance will switch automatically
into the standby mode.
• If a pot is removed from the cooking zone during operation, the display (4) will show “E0” and
an alternate warning signal will sound. If a pot is re-placed within 45 seconds, the cooking
process will continue with the level last set and an operating time that might have been set
before will continue to run. However, if no pot is recognized within 45 seconds, the appliance
will switch automatically into the standby mode.
Fan
After switch-on an inside fan starts working, which cools the interior parts of the appliance in
order to prevent the appliance from overheating.
It is normal for the fan to continue running in the standby mode after a long operation time.
Operating time restriction
The operating time restriction will cause the cooktop to switch automatically in the standby
mode if the settings have not been changed for a period of 2 hours. This happens independently
of the respectively set level.
After an automatic switch-off the cooking plate can be turned on once again and the maximum
operating time will be active again.
In case the operating time (timer) is set for a period of more than 2 hours, this setting takes
priority. The appliance switches off automatically after the set time has elapsed.
… 21 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rommelsbacher CT2010IN at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rommelsbacher CT2010IN in the language / languages: English, German as an attachment in your email.

The manual is 1,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info