714009
26
Zoom out
Zoom in
Previous page
1/28
Next page
26
The electronic control features several internal monitoring functions. If an error occurs, the
power supply will be quit and an error code will appear on the display, in addition there is an
acoustic signal during the fi rst 60 seconds.
Error code table:
E0 Pot recognition: Each cooking zone features a sensor which recognizes whether there
is a vessel on the cooking zone. If no suitable vessel is recognized on the cooking zone
after switch-on, the display will show “E0”.
Self help: Place a pot on the cooking zone within 45 seconds; otherwise the electronics
will switch the unit into the standby mode. (Also refer to point “Getting acquainted
with your appliance“)
E1 Electronic error: A short-circuit has occurred in an electronic circuit of the appliance.
Self-help: Not possible the appliance must be forwarded to the customer service at any rate.
E2 Temperature sensor: The temperature sensor below the glass ceramic plate provides an
undue value.
Self-help: Allow the appliance to stand for a while in order to adjust to the surrounding
temperature.
E3 Electronic control of over-voltage: An Error has occurred in an electronic circuit of the
appliance due to excessively high voltage (> 270 V~).
Self-help: Make sure the appliance is connected to the voltage indicated on the rating label.
E4 Electronic control of under-voltage: An error has occurred in an electronic circuit of
the appliance due to excessively low voltage (< 160 V~).
Self-help: Make sure the appliance is connected to the voltage indicated on the rating label.
Error codes
Before cleaning always disconnect the unit from the mains!
Let the appliance cool down before cleaning!
• Remove any coarse residues from the glass ceramic plate by means of a special glass scraper,
which is available in the specialised trade and in household equipment shops.
• Following that clean the cold glass surface with a damp cloth and some dishwater and wipe
it dry with a clean cloth or kitchen tissue. On the market there are suitable cleaning agents for
glass ceramic cooktops available with which the whole glass surface is treated by means of a
kitchen tissue until there is no soiling visible anymore.
Never immerse the appliance into water and do not use steam jet appliances.
• Make sure no water or steam may infi ltrate the appliance from below either.
• Never use abrasives, steel wool or sharp, scratchy objects.
• If there is any dirt visible in the area of the ventilation slots, it can be removed from the out
side by means of a vacuum cleaner.
Cleaning and maintenance
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rommelsbacher CT2010IN at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rommelsbacher CT2010IN in the language / languages: English, German as an attachment in your email.

The manual is 1,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info