490003

Rommelsbacher BGO1600 Manual

7
Zoom out
Zoom in
Previous page
1/20
Next page
6
6.4.2 Example of how to change operating time from 3 to 10 minutes during operation
Activated function
The function of combined top/bottom heat is active
(symbolised function at the 4th digit and top right-hand
oven symbol are static). With regard to the example, the
operating time effectively remaining is 3 minutes.
Press Setting Button [°C] for changing to set the requested temperature
Changing the
requested
temperature
The effective requested temperature (example: 200°C) is
indicated.
The symbolised function at the 4
th
digit is blinking. Now you
may alter the requested temperature within a range from
50 to 300°C.
Adjust value via [ + ] / [ - ] buttons as required
Press Setting Button [°C] for changing to set the operating time (Timer)
Changing the
operating time
(Timer)
The operating time effectively remaining is 3 minutes.
The symbolised function at the 4
th
digit is blinking and the
operating time can be set within a range from 1 to 99 min.
Adjust value via [ + ] / [ - ] buttons as required
Press Plus Button [+] 7 times to increase the remaining operating time to 10 min.
Altered operating
time
The operating time effectively remaining was changed to
10 min. The symbolised function at the 4
th
digit keeps
blinking (further changes would be possible). The altered
value affecting the operating time has already been
adopted nonetheless.
Wait 12 seconds for the symbolised function at the 4th digit to stop blinking
Activated function
The function of combined top/bottom heat is active
(symbolised function at the 4
th
digit and top right-hand
oven
symbol are static). The operating time effectively remaining
is 10 minutes.
Cf. Table 6.2.1: Setting of parameters for manual functions
6.5 Pause function during manual operation
Manual functions can be interrupted (paused) by briefly pressing the Start/Stop Button [►■].
This will prompt deactivation of any heating functions and interruption of any operating times
probably effective. Interruption is signalled by the oven symbol in the upper right-hand corner of
the display extinguishing. Depending on the respective programme step, the temperature currently
prevailing around the meat probe and the operating time effectively remaining will be indicated.
Briefly re-pressing the Start/Stop Button [►■] will make the function resume. Any manual function
that is stopped will be automatically quit after 12 seconds unless a button is pressed. Thereafter,
the current time will be indicated again.
6.6 Finish of operating time / Core temperature reached in Manual Operation
If a time was preset for a manual function, you will hear an intermittent signal for approx.
1 minute once the pre-programmed time has elapsed. At the same time, the appliance will power
down automatically. The oven symbol in the upper right-hand corner of the display will extinguish
and the remaining operating time will be indicated as “0” min.
Likewise, you will hear an intermittent signal when the preset core temperature was reached in the
“combined top/bottom heat with meat probe” function. In that case, too, the oven symbol in the
upper right-hand corner of the display will extinguish, whereas the current core temperature will
continue being activated on the display.
The audible signal may be acknowledged by pressing any button. Thereafter, the current time will
be indicated again.
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rommelsbacher BGO1600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rommelsbacher BGO1600 in the language / languages: English, German as an attachment in your email.

The manual is 0,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info