490003

Rommelsbacher BGO1600 Manual

4
Zoom out
Zoom in
Previous page
1/20
Next page
3
5. Setting the time and the audible signal’s sound level
When the Biological Oven is connected to the mains supply, the time will automatically adapt to
0:00 h. Symbol “A” is blinking. To put the appliance into operation, you will have to set the time
first. Having set the time you can furthermore select the audible signal’s sound level.
Attention: The setting menus will be quit automatically after 5 seconds if no button was pressed.
The set value will be adopted automatically in the process.
Table 1: Setting the time and the audible signal’s sound level
Function Readout Description
Readout after
connecting the mains
plug
Display of the time adjusted to 0:00h upon
switch-on. Digits and symbol “A” are blinking.
Press the Setting Button [°C] for setting the time
Setting the time
For the period the time can be set, the dot in
the centre of the readout keeps blinking.
Press [ + ] / [ - ] buttons to adjust
Press the Setting Button [°C] for setting the audible signal’s sound level
Setting the audible
signal
Audible signal can be adjusted via the Minus
Button [-]: sound level 1 – low
sound level 2 - medium sound level 3 – loud
The current audible signal keeps activated as
long as the Minus Button [-] is pressed.
Press [ - ] button to adjust
Press the Setting Button [°C] to change to the standard readout (time) (END)
Display of time
(standard readout)
When the time is displayed, all heating
functions are off. The appliance is now ready
for use and in basic position.
If you wish to set the time or buzzer frequency later on, keep the Setting Button [°C] pressed
for 2 seconds while the time is displayed. Thereafter, the setting menu for the time becomes
activated while the dot in the middle of the display is blinking (step 2 in the above table).
6. Manual Operation
Attention: If no button is pressed for 12 seconds within the selection and setting menus before a
function is started, those menus will be quit automatically, with the time appearing on the display.
Any values set until that time will be cancelled.
6.1 Selecting the function
By pressing the Plus [+] or Minus button [-], you may select one of the available manual
functions, which will appear on the display as follows:
Top heat Bottom heat Combined
top/bottom heat
Combined top/
bottom heat
with meat probe
Grilling
Having selected the function, acknowledge by pressing the Setting Button [
°C]. Now you can set
the temperature and time values for the function selected.
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rommelsbacher BGO1600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rommelsbacher BGO1600 in the language / languages: English, German as an attachment in your email.

The manual is 0,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info