647722
110
Zoom out
Zoom in
Previous page
1/169
Next page
110
Troubleshooting
If an unexpected problem occurs while using the XV-2020, read this chapter first. It contains numerous tips
for resolving problems.
* If a message appears during operation, consult the following section Error Messages (p. 116).
Problems when using the XV-2020
No sound
Is the VOLUME lowered?
Check the VOLUME knob, and the volume settings on the connected amp/mixer, etc.
Have connections been made correctly?
If there is sound in the headphones, it is possible that the connection cables are broken, or that the amp or
mixer is malfunctioning. Check the connection cables and other devices once again.
Is the Patch mode selected?
When song data is played back in the Patch mode, only the sound of a single Part is played. Change to the
Performance mode, then play the song data. (p. 39)
Is the MIDI receive channel correct?
Make sure that the MIDI transmit channel of the connected device matches the receive channel of the XV-
2020 (p. 35).
Are the Tone, Patch and Part level settings excessively low?
Check the level settings of each Tone, Patch and each Part. (Patch p. 46, Part p. 72)
Are Tones or Parts turned off?
Check the on/off settings of each Tone and each Part. (Tone p. 46, Part p. 71)
Are the key range settings correct?
Check the key range settings of each Tone and each Part. (Tone p. 49, Part p. 73)
Has the volume been lowered by volume/expression messages received from an external device?
The volume will return to normal when the power is turned on once again.
Are the effect settings correct?
Check settings such as Effect On/Off (p. 76), and Effect Balance and Level (p. 76).
Are the output destination settings correct?
Check the Output Assign and MFX Output Assign settings. (p. 80)
Is MIDI-USB Thru turned on?
Turn the MIDI-USB Thru parameter off, or turn on the MIDI Thru parameter in the connected computer
(p. 95).
Is the specified Wave Expansion Board properly installed?
EXP-A (B) patches and rhythm sets cannot be selected unless the Wave Expansion Board is installed in the
designated slot. (p. 105)
Pitch is wrong
Is the Master Tune setting correct?
Check the setting. (p. 94)
Is Scale Tune selected?
Check the setting. (p. 51, p. 75)
Are the pitch settings for each Tone and each Part correct?
Check each setting. (Tone p. 46, Part p. 72)
Have pitch bend messages received from an external device caused the pitch to “stick”?
The pitch will return to normal when the power is turned on.
Effects do not apply
Are MFX, CHORUS, and REVERB turned off?
Check the setting. (p. 76)
Are the various effect settings correct?
If the send levels to each effect are at 0, effects will not apply. Check each setting. (p. 78, p. 79, p. 80)
110


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland XV-2020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland XV-2020 in the language / languages: English as an attachment in your email.

The manual is 4,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info