647744

Roland XP-30 Manual

52
Zoom out
Zoom in
Previous page
1/216
Next page
52
Chapter 2. Playing
■ Playing Fatter and Richer
Sounds by Combining Patches
(Layer)
If a Layer Performance is selected, you can play all Parts with
the Local parameter ON. Combining the Parts will produce,
thicker, fatter sounds.
fig.2-08.e
1. Make sure that PERFORM PLAY display is showing.
2. Make sure that the upper right of the display indicates
“LAYER p* ”(* is the part number). If the display
indicates “part=* ” (* is the part number), the
performance is a “single performance,” so hold down
[SHIFT] and press [SOLO] to change to a layer
performance.
* The setting here is linked to the Key Mode parameter
(PERFORM/COMMON/PERFORM COMMON).
3. Press the function button for the part that you wish to
play, to make the indicator light. When the [1-8/9-16]
indicator is dark, parts 1–8 can be selected, and when the
[1-8/9-16] indicator is lit, parts 9–16 can be selected.
The Local parameter of the selected part will be ON.
* This setting is linked with the Local parameter (PERFORM/
MIDI/MIDI).
4. Repeat step 3 to turn the Local parameter ON for each
part that you wish to play.
■ Splitting the Keyboard to Play
Separate Patches in Different
Sections (Split)
If you’ve selected a Layer Performance, you can split the
keyboard to play separate Patches with different sections of
the keyboard. As the note range that plays each Part can be
specified individually, you can split the keyboard into a
maximum of 16 sections.
For instance, you can play strings in the lower note section,
piano in the higher note section and both sounds in the
middle note section.
fig.2-09.e
* If a KEY RANG display (PATCH/COMMON) has been set,
sounds are produced in the overlapping sections between the key
ranges specified for the Patch and Performance.
1. Make sure that the PERFORM PLAY display is showing.
2. Make sure that the upper right of the display indicates
“LAYER p* ”(* is the part number). If the display
indicates “part=* ” (* is the part number), the
performance is a “single performance,” so hold down
[SHIFT] and press [SOLO] to change to a layer
performance.
* The setting here is linked to the Key Mode parameter
(PERFORM/COMMON/PERFORM COMMON).
3. Press the function button for the part that you wish to
play, to make the indicator light. When the [1-8/9-16]
indicator is dark, parts 1–8 can be selected, and when the
[1-8/9-16] indicator is lit, parts 9–16 can be selected.
The Local parameter of the selected part will be ON.
* This setting is linked with the Local parameter (PERFORM/
MIDI/MIDI).
4. Repeat step 3 to turn the Local parameter ON for each
part that you wish to play.
5. Press [EDIT] to make the indicator light. Then press the
[COMMON] function button, and press [ ] or [ ] to
access the PERFORM COMMON display.
Part 1 Part 2 Part 15 Part 16
Local parameters
Part 1: Strings
Part 1 + Part 2:
(Strings + Piano)
Part 2: Piano
… 52 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland XP-30 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland XP-30 in the language / languages: English as an attachment in your email.

The manual is 5,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info