647744

Roland XP-30 Manual

54
Zoom out
Zoom in
Previous page
1/216
Next page
54
Chapter 2. Playing
■ Assigning a Different Patch to a
Part
The Patch assigned to each Part can be stored as a
Performance parameter.
1. Make sure that the PERFORM PLAY display is showing.
2. Press [ ] or [ ] to choose the Part to which you want
to assign a different Patch.
3. While holding down [PERFORM], press [PATCH] to call
up the PLAY display (PART PLAY) of the Patch assigned
to a specific Part.
fig.2-13
The upper right of the display will indicate the number of the
currently selected part (the current part).
4. Use the same procedure as in Patch mode to select a
Patch (p. 47).
* This setting is linked with the Group parameter and Number
parameter (PERFORM/PART/PATCH).
5. Press [PERFORM] or [EXIT] to return to the PERFORM
PLAY display.
■ Using the Sliders to Modify the
Sound in Realtime
(Sound Palette Function)
Using the Sound Palette function, you can modify sound
characters of the Patch assigned to a Part or adjust the
volume level of each Part.
* Sound variations or volume changes made with the Sound
Palette function affect only the performance. They have no effect
on the currently selected Performance, so the Sound Palette
settings cannot be saved. If you change the Performance, these
settings will be lost.
* The sound character and volume changes created using the
Sound Palette will also be transmitted to the external MIDI
devices.
Changing Sound Characters
* If Single Performance is selected, the effect applies only to the
current Part. With Layer Performance selected, this affects only
the Parts with Local parameter (PERFORM/MIDI/MIDI) set
ON.
1. Make sure that the PERFORM PLAY display is showing.
2. Press [FILTER/ENV] to light its indicator.
3. Move the sliders while you play the XP-30’s keyboard to
vary the sound.
To change brightness, move the CUTOFF slider.
To change resonance, move the RESO slider.
To change attack time, move the ATTACK slider.
To change decay time, move the DECAY slider.
Changing the Level (Volume) of Each Part
1. Make sure that the PERFORM PLAY display is showing.
2. Press [LEVEL] to light its indicator.
3. Press [ ] or [ ] to select the Part whose level (volume)
you want to change.
If you’ve selected any of Parts 1–4, sliders 1, 2, 3, and 4 adjust
Parts 1, 2, 3, and 4, respectively.
If you’ve selected any of Parts 5–8, sliders 1, 2, 3, and 4 adjust
Parts 5, 6, 7, and 8, respectively.
If you’ve selected any of Parts 9–12, sliders 1, 2, 3, and 4
adjust Parts 9, 10, 11, and 12, respectively.
If you’ve selected any of Parts 13–16, sliders 1, 2, 3, and 4
adjust Parts 13, 14, 15, and 16, respectively.
4. Move the slider as you play to adjust the level (volume)
of each Part as desired.
… 54 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland XP-30 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland XP-30 in the language / languages: English as an attachment in your email.

The manual is 5,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info