647744
50
Zoom out
Zoom in
Previous page
1/216
Next page
50
Chapter 2. Playing
8. Rotate the VALUE dial or press [INC]/[DEC] to make
the setting. For details on the available categories, refer to
page 49.
* This setting is linked with the Category parameter (PATCH/
COMMON/PATCH CATEGORY).
Making a Patch Sound Thick or
Thin (Turning a Tone On/Off)
Since a Patch is a combination of up to four Tones, you can
switch unwanted (Tones out of the four) off and get just the
sound of a specific Tone.
* This setting is linked with the Switch parameter (PATCH/
WAVE/WAVE). If you want just one or two Tones to sound in
a Patch, turn the others off and store that setting on a Patch.
This cuts nonessential use of the XP-30’s simultaneous voices.
1. Make sure that the PATCH PLAY display is showing.
2. Make sure that [EDIT] indicator is dark. If it is lit, press
[EDIT].
At this time, the on/off setting of each Tone in the displayed
Patch will be shown by the indicators of TONE SWITCH [1]
[4]. Those that are lit are on, and those that are dark are off.
3. Use TONE SWITCH [1][4] to switch Tones on/off.
Playing Single Notes (Solo)
Normally, the XP-30 allows you to play chords. Pressing
[SOLO] allows performance using single notes. This function
is effective when performing a solo using single-note Patches
like sax and flute.
1. Make sure that the PATCH PLAY display is showing.
2. Press [SOLO] so its indicator lights.
Now you can play a solo.
* This setting is linked with the Assign parameter (PATCH/
CONTROL/KEY MODE & BENDER). When the [SOLO]
indicator is turned on, the Assign parameter will be set to
SOLO. When the indicator is dark, it will be set to POLY.
3. Play the XP-30 keyboard.
* If you press [SOLO] when Single Performance is selected, the
Solo function can be switched on or off for the current Part.
When Layer Performance is selected, the Solo function can be
switched on or off for the Parts with the Local parameter
(PERFORM/MIDI/MIDI) set ON. If a Rhythm Set is selected,
[SOLO] cannot be turned on.
Creating Smooth Pitch Changes
(Portamento)
Portamento ensures a smooth pitch changeover from one
note to the next note played. When [SOLO] is on (indicator
lights), you can simulate techniques like violin glissandos.
1. Make sure that the PATCH PLAY display is showing.
2. Press [PORTAMENTO]. Its indicator lights.
Youre ready to play portamento.
* This setting is linked with the Sw parameter (PATCH/
CONTROL/PORTAMENTO).
3. To change the portamento settings, press [EDIT] to make
the indicator light. Then press the [CONTROL] function
button, and press [ ] or [ ] to access the
PORTAMENTO display.
fig.2-06
4. Move the cursor over to Time, Mode, Type or Start
parameter.
See p. 73 for each parameters functions.
5. Rotate the VALUE dial or press [INC]/[DEC] to get the
value you want.
6. Press [EXIT] to return to the PATCH PLAY display and
play.
* If you press [PORTAMENTO] when Single Performance is
selected, the Portamento function can be switched on or off for
the current Part. When Layer Performance is selected, the
Portamento function can be switched on or off for the Parts with
the Local parameter (PERFORM/MIDI/MIDI) set ON. If a
Rhythm Set is selected, [PORTAMENTO] cannot be turned on.
Using the Sliders to Modify the
Sound in Realtime
(Sound Palette Function)
With the four sliders in the PALETTE section, you can create
sound variations or volume changes in real time.
* Sound variations or volume changes made with the Sound
Palette affect only the performance. They have no effect on
current Patch settings. Change the Patch and these Sound
Palette settings will be lost.
* The sound character and volume changes created using the
Sound Palette will also be transmitted to the external MIDI
devices.
50


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland XP-30 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland XP-30 in the language / languages: English as an attachment in your email.

The manual is 5,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info