647744

Roland XP-30 Manual

48
Zoom out
Zoom in
Previous page
1/216
Next page
48
Chapter 2. Playing
Selecting Patches by Category
(Patch Search Function)
The XP-30 provides a Patch Search function which allows
you to specify a type (category) of Patch so that you can
quickly find the desired Patch. There are a total of 38
categories.
1. Press [PATCH] to call up the PATCH PLAY display.
2. Press [CATEGORY] to turn the Patch Search function is
on.
The patch number display will change to the category
display.
* Now you can select patches within the currently selected
category either by rotating the VALUE dial or by using [INC]/
[DEC]. To change the category group, use the numeric keys.
If you wish to select patches from a different category,
continue with the following procedure.
3. Hold down [CATEGORY] and press a key [0]–[9]
(numeric keys) to select the category group.
fig.2-03
4. Rotate the VALUE dial or press [INC]/[DEC] to select a
Category.
The selected category display will blink. At this time, the
selected category has not yet been finalized.
* Now if you press [ ] the following display will appear, and you
can select patches while viewing the number of patches (a)
included in the currently selected category, and the order of this
patch among the patches (b) that were selected after the search.
To change the category, use the numeric keys.
fig.2-04
5. Press [ENTER] to finalize the entry.
* In step 4, you can also select a category directly by pressing the
corresponding numeric key.
6. Rotate the VALUE dial or press [INC]/[DEC] to select a
Patch.
7. Press [CATEGORY] to turn the Patch Search function is
off.
You will return to the normal PATCH PLAY screen.
Express Patch Select (Digit Hold)
With the Digit Hold function turned on, the 100’s
position and 10’s position will be fixed when the
numeric keys are used to select a Patch. This means that
the numeric keys will only change the 1’s position, and
you won’t have to press [ENTER] for each selection.
The same applies to selecting Performances and
Rhythm Sets.
1. Hold down [SHIFT] and press [ENTER] to turn on
Digit Hold.
fig.2-02
The numbers in the 100’s position and 10’s position will
be displayed in a smaller size to indicate Digit Hold is
on.
2. When you enter a numeric key number, the 1’s
position will change immediately without having
to press [ENTER].
3. To turn off Digit Hold, hold down [SHIFT] and
press [ENTER] once again.
… 48 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland XP-30 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland XP-30 in the language / languages: English as an attachment in your email.

The manual is 5,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info