643315
16
Zoom out
Zoom in
Previous page
1/80
Next page
16
Getting ready to play
1. Attach the included sound module mounting plate to
the TD-9.
Use the included wing bolts to attach the plate as shown in
the illustration.
* Use only the included wing boits. Using any other nuts
may cause malfunction.
* You must use the TD-9 with the sound module mounting
plate installed.
When turning the unit upside-down, get a bunch of
newspapers or magazines, and place them under the four
corners or at both ends to prevent damage to the buttons
and controls. Also, you should try to orient the unit so no
buttons or controls get damaged.
When turning the unit upside-down, handle with care to
avoid dropping it, or allowing it to fall or tip over.
2. Attach the TD-9 (with the sound module mounting
plate installed) to your drum stand (such as the MDS-
9; available separately).
3. Connect the included cable to the TD-9’s TRIGGER
INPUT connector, and connect your pads and
pedals.
Labels indicating the pad to be connected are attached to
the cable.
Connect the pads and pedals as shown in the illustration.
If you don’t connect a pad to each of the cables, make the
following settings for unconnected pads in order to prevent
malfunction.
- Turn the instrument’s Group setting OFF (p. 25).
- In the pad’s MIDI settings, turn the NOTE NUMBER
setting OFF (p. 32).
When using any other cymbal pads than CY-12R/C or CY-
15R, no need to connect the “RDB” cable to the cymbal
pad. Keeping the cap on top of the “RDB” cable plug,
please fasten it up on the stand so that it does not disturb
your playing.
Mounting the TD-9 on the Stand
T3
T2
CR1
HH
SNR
HHC
KIK
TD-9
T1
RD
RDB
TD-9_e.book 16 ページ 2008年1月23日 水曜日 午後4時24分
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland TD-9 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland TD-9 in the language / languages: English as an attachment in your email.

The manual is 10,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info