643315
14
Zoom out
Zoom in
Previous page
1/80
Next page
14
Basic concepts and operations of the TD-9
This section explains operations that are common to all of the
TD-9’s functionality.
The TD-9 has no “Save” function to save your settings. Any
changes you make will be saved when you turn off the power.
* Be sure to turn off the power by pressing the POWER
button (p. 18).
In this manual, references to the panel buttons, knobs and dial
are enclosed in square brackets [ ]; e.g., [SETUP].
The cursor is the highlighted text in the screen that indicates
what you can edit.
If there is more than one editable item in a screen, you can use
the [CURSOR] buttons to move the cursor to the item you want
to edit.
The [F1]–[F3] buttons are called “function buttons.” The bottom
line of the display indicates the name of the functions performed
by [F1]–[F3].
For example if an explanation in this manual refers to [KIT]-[F2]
(FUNC), this means that you should press [KIT] and then [F2] (in
this case, there will be an indication of “FUNC” above the [F2]
button).
The [+] and [-] buttons (referred to as [+/-] in this manual) and
VALUE dial (referred to as [VALUE]) are both used to edit
settings.
When this manual tells you to “use [+/-],” you can also use
[VALUE] to get the same result. Each method has the following
characteristics.
[+/-]
The value of the setting will increase each time you press
[+], and decrease each time you press [-]. This is
convenient when you want to make fine adjustments.
When making an on/off setting, press [+] to turn it on or
press [-] to turn it off.
Shortcut: The value will increase rapidly if you hold down
[+] and press [-], or decrease rapidly if you hold down [-]
and press [+].
The value will change in larger steps if you press [+/-]
while holding down [SHIFT].
[VALUE] dial
This dial lets you make large changes in a value easily.
Convenient for working with parameters that have broad value
range.
If you turn the [VALUE] dial while holding down [SHIFT],
the value will change more rapidly.
Saving your settings
Buttons, dial, and knobs
Cursor
Cursor
Function buttons ([F1]–[F3])
Using the “+” button, “-” button,
and VALUE dial
TD-9_e.book 14 ページ 2008年1月23日 水曜日 午後4時24分
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland TD-9 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland TD-9 in the language / languages: English as an attachment in your email.

The manual is 10,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info