643315
13
Zoom out
Zoom in
Previous page
1/80
Next page
13
TD-9 Components
11. + button, - button
Use these buttons to switch drum kits or to edit a value.
Pressing the “+” button increases the value, and pressing
the “-” button decreases it.
12. VALUE dial
This dial has the same function as the “+” and “-” buttons.
Use the dial when you want to quickly change the drum kit
or value in large steps.
13. SETUP button
Use this button to make settings that affect the entire TD-9,
such as MIDI, triggering, pad sensitivity etc.
14. EXIT button
Each time you press this button, you return to the screen of
the previous level. Pressing it several times will take you to
the “DRUM KIT” screen.
15. SHIFT button
Used in conjunction with other buttons. When holding it
down, the functions of other buttons will change.
16. CLICK (TEMPO) button
This starts the Metronome. Holding this button while
holding down the SHIFT button, you can edit various
parameters related to tempo and click.(sound etc)
17. SCOPE button
This activates the Scope function, allowing you to view
your timing on the screen.
18. KIT button
Press this to access the basic KIT screen, (p. 22) ideal
when just playing the TD-9.
19. USB memory slot
For connecting USB memory key (sold separately).
20. PHONES jack
For connecting stereo headphones. Using the headphone
jack will not mute the main OUTPUT jacks.
21. TRIGGER INPUT connector
Connecting the special cable connects the pads and
pedals to the TD-9.
22. Cable hook
Used to secure the AC adaptor cable.
23. Sound module mounting plate attachment holes
Attach the included sound module mounting plate here so
that you can attach the TD-9 to your drum stand.
24. Security Slot ( )
http://www.kensington.com/
1. DC IN jack
Connect the included AC adaptor here.
2. OUTPUT jacks (L/MONO, R)
All sounds of the TD-9 are output here. Use for connecting
to an amp or other external audio equipment.
If you’re working in mono, only use the L/MONO jack.
3. MIX IN jack
For connecting an external audio source such as MP3 or
CD players. All sound input here is also sent from the
OUTPUT and PHONES jacks.
* To adjust the volume, use the controls of the external
device connected to MIX IN.
4. MIDI OUT/THRU connector
Use this when you want to use the pads to play external
MIDI sound sources or for recording with sequencers (p.
46).
5. MIDI IN connector
Use this for triggering sounds in the TD-9 via a MIDI
sequencer or pad controller (p. 46).
6. TRIGGER IN jacks (AUX, CRASH2)
Use these jacks to add more pads.
Jack panel
1 2 3 4 5 6
TD-9_e.book 13 ページ 2008年1月23日 水曜日 午後4時24分
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland TD-9 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland TD-9 in the language / languages: English as an attachment in your email.

The manual is 10,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info