643315
18
Zoom out
Zoom in
Previous page
1/80
Next page
18
Getting ready to play
* Once connections have been made (p. 17), turn on the power to the connected equipment in the order specified. Doing it in the
wrong order raises the risk of damage/malfunction to that equipment.
1. Turn [VOLUME] all the way to the left.
2. Do the same with the connected amp or audio
system.
3. Press [POWER].
After a time, [POWER] will light.
* The TD-9 is equipped with a protection circuit and requires
a brief interval a few seconds) after powering before it will
operate normally.
4. Power-on the connected amp or audio system.
5. While hitting a pad, gradually turn [VOLUME]
toward the right to adjust the volume.
Adjust the volume of the connected amp/ audio system to
the desired level.
Turning the power off
1. Turn the volume down on the TD-9 and any
connected equipment.
2. Power-off the connected equipment.
3. Hold down [POWER] until the screen indicates
“POWER OFF.”
After a moment, [POWER] goes dark.
Turning the power on/off
Caution when turning on the power
After you turn on the power, do NOT touch any pads or
pedals until the drum kit name (the illustration below) has
appeared in the display. Doing so can cause various
problems.
If you don’t hear any sound
Check the following points.
Pad and pedal connections
Is the cable correctly connected to the TRIGGER
INPUT connector?
Are the cables correctly connected to each pad or
pedal?
When using an amp or audio system
Are the TD-9’s OUTPUT jacks connected correctly to
the input jacks of your amp/audio system?
Are the input selections and volume settings correct on
that amp/audio system?
Possible problem with the connection cables
themselves?
Isn’t the [VOLUME] turned all the way to the left?
Have the input select settings of your audio system or
amp been made correctly?
Is the amp or audio system volume setting correct?
When using headphones
Are your headphones plugged into PHONES jack?
TD-9_e.book 18 ページ 2008年1月23日 水曜日 午後4時24分
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland TD-9 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland TD-9 in the language / languages: English as an attachment in your email.

The manual is 10,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info