499471

Roland Juno Di Manual

57
Zoom out
Zoom in
Previous page
1/136
Next page
57
Overview
fig.shift.eps
By holding down the [SHIFT] button and pressing another button, you
can access the screen for making settings related to that button. (In other
words, the [SHIFT] button provides a shortcut to the corresponding
screen.)
For example, if you hold down the [SHIFT] button and press the [PIANO]
button, the MFX setting screen will appear.
For details, refer to the page where a particular function is explained.
For details, refer to “Shortcut List” (p. 131).
Moving the cursor
Each single screen displays multiple items.
To change the setting of an item, move the cursor to that item.
Also, to select an item, move the cursor to that item.
fig.disp-Cursor-e.eps_70
Move the cursor with the cursor buttons.
Moving between pages
If an arrow like the one in the illustration is shown in the left or right of
the screen, this means that another page exists in the direction of the
arrow.
fig.disp-Page-e.eps
Use the [
] [ ] cursor buttons to move between pages.
Changing a value
To change the value, use the dial.
fig.dial.eps
Turning the dial clockwise increases the value, counterclockwise
decreases the value.
The value will change in larger steps if you hold down the [SHIFT] button
while turning the dial.
If you turn the [NUMERIC] button on, you’ll be able to use the [RHYTHM
(0)]–[PERFORM (9)] buttons to enter numeric values.
fig.numeric.eps
You can use this method to numerically specify tone numbers,
performance numbers, or MIDI program change numbers.
1.
Use the [
] [ ] buttons to move the cursor to the
number that you want to change.
2.
Press the [NUMERIC] button, so it’s lit.
The [0]–[9] buttons will light.
3.
Use the [0]–[9] buttons to enter a numerical value, and
then press the [ENTER] button.
Your input will be finalized, and the illumination of the [0]–[9]
buttons will return to their previous state.
If you press the [NUMERIC] button once again without pressing the
[ENTER] button, the [0]–[9] buttons will return to their previous state
without the number being changed.
If you’ve pressed the [NUMERIC] button and are entering a
numeric value, pressing the [EXIT] button will reset the value
you were entering.
Basic Operation of the JUNO-Di
The [SHIFT] Button’s Function
Editing a Value
Cursor
Entering a Value ([NUMERIC] Button)
JUNO-Di_e.book 57 ページ ２００９年６月２２日　月曜日　午前９時２３分
… 57 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland Juno Di at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland Juno Di in the language / languages: English as an attachment in your email.

The manual is 13,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info