499471
59
Zoom out
Zoom in
Previous page
1/136
Next page
59
Detailed Tone Settings
The process of modifying a tone’s settings is called “patch editing (PATCH
EDIT).”
To edit the currently selected tone, proceed as follows.
1.
Press the [MENU] button.
The “MENU” screen will appear.
2.
Use the [
] [ ] buttons to select “EDIT,” and press
the [ENTER] button.
3.
Using the [ ] [ ] buttons, get “PATCH EDIT” to be
indicated in the upper line of the screen.
fig.disp-ptachedit.eps
_70
You can access the edit screen of step 3 by holding down the
[SHIFT] button and pressing the [RHYTHM] button.
If you’re using split or dual, the part name is shown in the upper line
of the screen.
For split
U
: Upper (UPPER) part
L
: Lower (LOWER) part
For dual
1
: Part 1
2
: Part 2
4.
Use the [
] [ ] buttons to move the cursor to the
item that you want to edit.
5.
Use the dial to set the desired value.
6.
Press the [EXIT] button to leave the edit screen.
The changes you make are temporary; they will be discarded
when you turn off the power or select a different tone. If you
want to keep the changes you make, you must write them into
memory (p. 62).
When you use Patch Edit to modify the settings, an “*” will
appear next to the tone name in the main screen. The “*” will
disappear when you save that tone (p. 62).
Tone Settings
Editing a Tone’s Volume, Portamento,
Mono/Poly, or Bend Range (Patch Edit)
Item
Value Description
Patch Level
0–127
Specifies the volume of the tone.
Portamento
Sw
OFF, ON
Specifies whether the portamento effect
will be applied (ON) or not (OFF).
* Portamento is an effect which smoothly
changes the pitch from the first-played
key to the next-played key. By applying
portamento when the Mono/Poly is
“MONO,” you can simulate slide
performance techniques on a violin or
similar instrument.
Portamento
Time
0–127
When portamento is used, this specifies
the time over which the pitch will change.
Higher settings will cause the pitch
change to the next note to take more
time.
Mono/Poly
MONO,
POLY
Specifies whether the patch will play
polyphonically (POLY) or monophonically
(MONO).
The “MONO” setting is effective when
playing a solo instrument patch such as
sax or flute.
MONO
: Only the last-played note will
sound.
POLY
: Two or more notes can be played
simultaneously.
Bend Range
Up
0–+48
Specifies the degree of pitch change in
semitones when the pitch bend lever is all
the way right.
For example, if this parameter is set to
“+12,” the pitch will rise one octave when
the pitch bend lever is moved to the right-
most position.
Bend Range
Down
0–-48
Specifies the degree of pitch change in
semitones when the pitch bend lever is all
the way left.
For example if this is set to “-48” and you
move the pitch bend lever all the way to
the left, the pitch will fall 4 octaves.
JUNO-Di_e.book 59 ページ 2009年6月22日 月曜日 午前9時23分
59


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland Juno Di at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland Juno Di in the language / languages: English as an attachment in your email.

The manual is 13,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info