710336

Roland DA-2496 Manual

37
Zoom out
Zoom in
Previous page
1/48
Next page
37
Troubleshooting
● Depending on the performance of your computer, digital data may not be
transferred correctly if the buffer size is too small, causing noise to be heard.
In this case, you should increase the buffer size. For details, refer to DA-PCI Control Panel (p. 32).
Depending on your software, it may be necessary to set the buffer size from your software. For
details, refer to the operation manual for your software.\
● Howling could be produced depending on the location of microphones relative to
speakers. This can be remedied by:
1. Changing the orientation of the microphone(s).
2. Relocating microphone(s) at a greater distance from speakers.
3. Lowering volume levels.
● When Word Clock is used, jitter from the master device may cause noise to occur.
If you are using Word Clock with another digital device as the master and the DA-2496 and DA-
PCI as the slave, jitter from the master device may cause noise to occur.
■ When using SONAR, DA In 9/10 is displayed as an audio input
source
● The Monitor Mixer input may be displayed as DA In 9/10.
Even in this case, DA In 9/10 can be used normally for the Monitor Mixer.
■ In Windows 2000, only one set of audio output destinations is
displayed for SONAR.
● By performing the following procedure, you will be able to use four sets of audio
with SONAR.
1. From the Option menu, select Audio, and click the Advanced tab.
2. In the Playback and Recording area, uncheck “Always Use MME
Interface, Even When WDM Drivers Are Available.”
3. Click [OK].
4. When the dialog box appears, restart SONAR.
5. Once again select Audio from the Option menu, and click the Drivers
tab.
6. In the Input Drivers and Output Drivers area, click all devices named
Edirol DA-PCI to highlight them.
7. Next click the General tab, and select the device named Edirol DA-PCI
as the Playback Timing Master and the Recording Timing master.
8. Click [OK].
9. When the dialog box appears, restart SONAR.
… 37 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland DA-2496 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland DA-2496 in the language / languages: English as an attachment in your email.

The manual is 1,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info