710336
35
Zoom out
Zoom in
Previous page
1/48
Next page
35
DA-PCI Control Panel
Int. Clock Sample Rate
Select the sampling frequency when the Master Clock is set to Int. Clock.
Reset Rate When Idle... If this is checked, the sampling frequency
will return to the value specified by the control panel when the
device is released by the software.
Ext. Clock Sample Rate
Select the sampling frequency when the Master Clock is set to Ext. Clock.
Only the sampling frequency selected here can be used by software.
Multitrack Driver Device (Windows Me/98 only)
Specify how the MME device will be handled by software.
Single and In-Sync... When a certain software program handles all
MME devices simultaneously, this ensures that each MME device is
synchronized.
Independent... Use this setting when each MME device is used by
different software.
Multiple Card Sync... When multiple DA-PCI units are used
simultaneously, this ensures that they will be synchronized.
DMA Buffer Size
Specify the buffer size for MME (Windows), ASIO, and Sound Manager
(Macintosh). The buffer size is closely related to latency, and decreasing the
buffer size will also decrease the latency.
fig.60-01
When using Windows
2000, the DMA Buffer
Size will be displayed
as shown at the right.
fig.HW-mac
When using
Macintosh, the DMA
Buffer Size will be the
Sound Manager
input/output port
select fields.
Disable Control of the Monitor Mixer and Patchbay/Router by Audio
Applications (Windows Me/98 only)
If this is checked, the software (sequencer) will not be able to control the
Monitor Mixer or Patchbay/Router.
Depending on the
performance of your
computer, the digital data
may not be transferred
correctly if the buffer is too
small, causing noise. If this
occurs, increase the buffer
size.
Depending on your
software, you may need to
set the buffer size from
your software. For details,
refer to the operation
manual for your software.
The default values for buffer size are as follows.
Windows: 20 ms
Macintosh: ASIO, Sound Manager 1024 bytes
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland DA-2496 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland DA-2496 in the language / languages: English as an attachment in your email.

The manual is 1,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info