708898

Roland AX-Edge Manual

16
Zoom out
Zoom in
Previous page
1/22
Next page
Editing the Sound
The AX-Edge has three types of sound-related editing.
Program edit
Here you can edit parameters for a program. These parameters
include the on/off setting and level adjustment of each part,
effect settings for each program, and vocoder settings.
System effect edit
Here you can edit settings for the effects that apply to the overall
output sound (system effects).
The system effects provide chorus/delay, reverb, EQ, and
compressor.
Tone edit
Here you can edit tone-related parameters.
Tone edit is not possible on the AX-Edge itself. Use the dedicated
smartphone app “AX-Edge Editor” to edit these parameters.
For details, refer to “AX-Edge Editor.”
NOTE
The edited settings will disappear unless you save (write) them. If you
want to keep the settings, save them as follows.
To save tone edit settings, use AX-Edge Editor.
Editing the System Effects
1.
Press the [MENU/WRITE] button.
2.
Use the cursor [
K
] [
J
] buttons to select “SYSTEM EFFECT,”
and then press the [ENTER] button.
3.
Use the cursor [
K
] [
J
] buttons to select a parameter, and
use the [–] [+] buttons to edit the value.
For details, refer to “Parameter Guide (English)” (PDF).
4.
To save the changes, hold down the [SHIFT] button and
press the [MENU/WRITE] button.
The SYSTEM WRITE confirmation screen appears.
Write System ?
[Exit]:N [Ent]:Y
5.
To execute, press the [ENTER] button.
If you decide to cancel, press the [EXIT] button.
MEMO
To save the system effect settings, execute the Write operation while
you’re in the system effect setting screen. You can’t save system effect
settings from other screens.
Editing a Program
1.
Press the [MENU/WRITE] button.
2.
Use the cursor [
K
] [
J
] buttons to select “PROGRAM
SOUND” or “PROGRAM CTRL,” and press the [ENTER]
button.
3.
Use the cursor [
K
] [
J
] buttons to select a parameter, and
use the [–] [+] buttons to edit the value.
For details, refer to “Parameter Guide (English)” (PDF).
Saving a Program (Program Write)
4.
To save the changes, hold down the [SHIFT] button and
press the [MENU/WRITE] button.
The program name input screen appears.
PROG NAME [Ent]
InitProg
5.
Use the cursor [
K
] [
J
] buttons to move the cursor, and use
the [–] [+] buttons to change the character.
6.
When you finish specifying the name, press the [ENTER]
button.
A screen appears where you can select the save-destination
program.
7.
Use the [–] [+] buttons to select the save-destination
program.
The lower line of the screen shows the program name of the
save-destination.
When you save, the program is overwritten and the previous
data is lost.
8.
Press the [ENTER] button.
A confirmation message appears.
9.
To execute, press the [ENTER] button.
If you decide to cancel, press the [EXIT] button.
NOTE
Changes you make to the program you’re editing are lost if you turn off
the power while editing or select another program. If you want to keep
your settings, save the program.
16
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland AX-Edge at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland AX-Edge in the language / languages: English as an attachment in your email.

The manual is 4,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Roland AX-Edge

Roland AX-Edge User Manual - German - 22 pages

Roland AX-Edge User Manual - Dutch - 22 pages

Roland AX-Edge User Manual - French - 22 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info