708898
14
Zoom out
Zoom in
Previous page
1/22
Next page
Using the Vocoder (Vocoder)
The “Vocoder” adds effects to a human voice. If you run your voice through the
vocoder, you can give it a toneless, robotic tone. Control the pitch by playing the
keyboard.
* Acoustic feedback could be produced depending on the location of
microphones relative to speakers. This can be remedied by:
5
Changing the orientation of the microphone(s).
5
Relocating microphone(s) at a greater distance from speakers.
5
Lowering volume levels.
1.
Connect a microphone to the rear panel MIC INPUT jack.
NOTE
The AX-Edge supports only dynamic microphones. It does not support
condenser microphones.
2.
Use the rear panel [MIC INPUT Volume] knob to adjust the
volume.
Make detailed adjustments to the MIC INPUT volume after you
select the sound (program).
Initially, set the knob to approximately the center position.
3.
Press the [VOCODER/VOICE] button.
4.
Use the [–] [+] buttons to select a sound (program).
Programs whose name starts with Voc:” have their parameters
set to use the vocoder.
5.
While playing the keyboard, vocalize into the
microphone.
Use the MIC INPUT volume to make fine adjustments to the
volume.
Editing the Vocoder Settings
1.
Press the [MENU/WRITE] button.
2.
Use the cursor [
K
] [
J
] buttons to select “VOCODER, and
then press the [ENTER] button.
3.
Use the cursor [
K
] [
J
] buttons to select a parameter, and
use the cursor [–] [+] buttons to edit the value.
For details on the parameters, refer to “Parameter Guide
(English)” (PDF).
4.
If you want to save the setting, execute the Program Write
operation.
Vocoder settings are saved individually for each program.
&
“Saving a Program (Program Write)” (p. 16)
5.
Press the [EXIT] button several times to return to the top
screen.
Adjusting the Mic Sensitivity
Depending on the environment in which you’re performing, noise
from the surroundings might be picked up by the mic, causing the
vocoder to not work as you intend.
In this case, adjust the microphone sensitivity so that is it less likely
to pickup noise.
1.
Press the [MENU/WRITE] button.
2.
Use the cursor [
K
] [
J
] buttons to select “SYSTEM, and
then press the [ENTER] button.
3.
Use the cursor [
K
] [
J
] buttons to select a parameter, and
use the [–] [+] buttons to edit the value.
Menu
[SHIFT] + cursor [K] [J]
Parameter
Cursor [K] [J]
Value
[–] [+]
MIC
NS Sw
OFF, ON: Noise suppressor on/
off (suppresses noise during
times of silence)
NS Thrs
0–127: Volume at which noise
suppression begins
NS Rls
0–127: Time from when noise
suppression begins until the
volume reaches 0
4.
If you want to save the setting, execute the System Write
operation.
&
“Saving the System Settings (System Write)” (p. 20)
Using Other Performance Functions
14
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland AX-Edge at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland AX-Edge in the language / languages: English as an attachment in your email.

The manual is 4,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Roland AX-Edge

Roland AX-Edge User Manual - German - 22 pages

Roland AX-Edge User Manual - Dutch - 22 pages

Roland AX-Edge User Manual - French - 22 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info