708898
18
Zoom out
Zoom in
Previous page
1/22
Next page
Other Functions
Checking the Remaining Battery
Charge
Remaining battery charge indication
Heres how to check the remaining battery charge.
1.
Hold down the [SHIFT] button and press the FAVORITE
[BANK] button.
The bank/number display shows the remaining battery charge
as 0–100 (%), and the LCD display shows the BATTERY INFO
screen.
2.
Once again, hold down the [SHIFT] button and press the
FAVORITE [BANK] button.
Return to the previous screen.
MEMO
You can also access the BATTERY INFO screen from the MENU.
* The battery charge indication is only an approximation.
* While the AC adaptor is connected, the displayed value will always be
“100.
Low battery indication
When the battery charge runs low while the AX-Edge is operating
on batteries, the decimal point in the lower right of the bank/
number display is lit. Replace the batteries as soon as possible.
If you continue use, the decimal point changes from lit to flashing,
and the display indicates Charge Battery. Stop using the
AX-Edge, and replace the batteries.
NOTE
If you continue use after the decimal point starts flashing, the display
indicates “Battery Low!” (the bank/number display indicates
“Lo”). Further operation will be impossible, and the power turns off
automatically.
* The batteries cannot be charged while youre using the AX-Edge.
* The remaining battery charge indication is only an approximation.
Convenient Functions (UTILITY)
Here you can back up the AX-Edges data to a USB flash drive, or
restore data from a USB flash drive back into the AX-Edge. You
can also use the “UTILITY” functions to return the AX-Edge to its
factory-set condition, or format a USB flash drive.
1.
Press the [MENU/WRITE] button.
2.
Use the cursor [
K
] [
J
] buttons to select “UTILITY, and
then press the [ENTER] button.
3.
Use the cursor [
K
] [
J
] buttons to select the item that you
want to edit and press the [ENTER] button.
Menu
Cursor [K] [J]
Explanation
BACKUP
Backs-up user data to a USB flash drive.
This creates system/user settings (.SVD).
RESTORE
Restores backup data from a USB flash drive
into the AX-Edge.
FACTORY RESET
Resets the AX-Edge’s settings to their factory-
set condition.
FORMAT USB MEMORY
Initializes a USB flash drive.
4.
Select the item that you want to execute, and press the
[ENTER] button.
Returning to the Factory Settings
(FACTORY RESET)
Heres how the settings that you edited and saved on the AX-Edge
can be returned to their factory-set condition.
* When you execute this operation, all the settings that you modified
after purchasing the AX-Edge, including the sound parameters, are
lost.
* If you will later need the current settings, be sure to use the backup
function p. 19) to save the current settings before you restore the
factory settings.
1.
Press the [MENU/WRITE] button.
2.
Use the cursor [
K
] [
J
] buttons to select “UTILITY, and
then press the [ENTER] button.
3.
Use the cursor [
K
] [
J
] buttons to select “FACTORY RESET,
and then press the [ENTER] button.
A confirmation message appears.
If you decide to cancel, press the [EXIT] button.
4.
Press the [ENTER] button.
A confirmation message appears once again.
5.
To execute, press the [ENTER] button once again.
6.
When the LCD display indicates Completed. turn the
AX-Edge’s power off and on again.
18
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland AX-Edge at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland AX-Edge in the language / languages: English as an attachment in your email.

The manual is 4,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Roland AX-Edge

Roland AX-Edge User Manual - German - 22 pages

Roland AX-Edge User Manual - Dutch - 22 pages

Roland AX-Edge User Manual - French - 22 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info