708869
59
Zoom out
Zoom in
Previous page
1/72
Next page
59
MIDI Implementation
Appendices
MIDI Time Code
Full Messages
* Data is received when Sync Source is set to "MTC." When the Quarter Frame message is
received, operation proceeds with the start of the song synchronized to
"00h00m00s00f00" with the "MTC Offset" and the "Delay Time" added.
* This acts upon the currently selected audio phrase.
* MIDI phrases and pattern phrases are ignored when Dual Mono mode is selected.
Status
Data Bytes Status
F0H 7FH, dev, 01H, 01H, 06H, F7H
01H, hrH, mnH, scH, frH
Byte Description
F0H Status of Exclusive Message
7FH Universal System Exclusive Message Real time Header
dev device ID (or 7FH)
01H sub-ID#1 (MIDI Time Code)
01H sub-ID#1 (Full Messages)
06H number of bytes
01H [TARGET] sub command
hrH Hours Count xyyzzzzz
x Reserved (0)
yy Time Code type
0 = 24 Frames / Sec
1 = 25 Frames / Sec
2 = 30 Frames / Sec (Drop Frame)
3 = 30 Frames / Sec (Non Drop Frame
zzzzz Hours (0-23)
mnH Minutes Count xxyyyyyy
xx Reserved (00)
yyyyyy Minutes (0-59)
scH Seconds Count xxyyyyyy
xx Reserved (00)
yyyyyy Seconds (0-59)
frH Frame Count xxxyyyyy
xxx Reserved (000)
yyyyy Frame No.(0-29)
F7H EOX (End of Exclusive)
MIDI Machine Control (MMC)
* This is Received when the MMC mode is set to "SLAVE."
* This acts upon the currently selected phrase.
STOP (MCS)
Status
Data Bytes Status
F0H 7FH, dev, 06H, 01H F7H
Byte Description
F0H Status of Exclusive Message
7FH Universal System Exclusive Message Real time Header
dev device ID (or 7FH)
06H MMC Command Message
01H STOP (MCS)
F7H EOX (End of Exclusive Message)
* Playback is stopped immediately when this command is received if the device ID
matches, or if 7FH is received.
PLAY (MCS)
Status
Data Bytes Status
F0H 7FH, dev, 06H, 02H F7H
Byte
Description
F0H Status of Exclusive Message
7FH Universal System Exclusive Message Real time Header
dev device ID (or 7FH)
06H MMC Command Message
02H PLAY (MCS)
F7H EOX (End of Exclusive Message)
* Playback is started immediately when this command is received if the device ID
matches, or if 7FH is received.
DEFERRED PLAY (MCS)
Status
Data Bytes Status
F0H 7FH, dev, 06H, 03H F7H
Byte Description
F0H Status of Exclusive Message
7FH Universal System Exclusive Message Real time Header
dev device ID (or 7FH)
06H MMC Command Message
03H DEFERRED PLAY (MCS)
F7H EOX (End of Exclusive Message)
* Playback is started immediately when this command is received if the device ID
matches, or if 7FH is received.
RECORD STROBE (MCS)
Status
Data Bytes Status
F0H 7FH, dev, 06H, 06H F7H
Byte
Description
F0H Status of Exclusive Message
7FH Universal System Exclusive Message Real time Header
dev device ID (or 7FH)
06H MMC Command Message
06H RECORD STROBE (MCS)
F7H EOX (End of Exclusive Message)
* Recording of the phrase begins when this command is received if the device ID matches,
or if 7FH is received.
* If MIDI signal recording is in effect, this command is ignored (MIDI cannot be recorded
with MMC).
RECORD EXIT (MCS)
Status
Data Bytes Status
F0H 7FH, dev, 06H, 07H F7H
Byte Description
F0H Status of Exclusive Message
7FH Universal System Exclusive Message Real time Header
dev device ID (or 7FH)
06H MMC Command Message
06H RECORD STROBE (MCS)
F7H EOX (End of Exclusive Message)
* Recording is stopped immediately when this command is received if the device ID
matches, or if 7FH is received.
* If MIDI signal recording is in effect, this command is ignored (MIDI cannot be recorded
with MMC).
LOCATE (MCP)
Format 2 - LOCATE [TARGET]
Status
Data Bytes Status
F0H 7FH, dev, 06H, 44H, 06H, F7H
01H, hrH, mnH, scH, frH, ffH
Byte Description
F0H Status of Exclusive Message
7FH Universal System Exclusive Message Realtime Header
dev device ID (or 7FH)
06H MMC Command Message
44H LOCATE(MCP)
06H Number of Bytes
01H [TARGET] sub command
hrH Standard time with Sub Frame
mnH
scH
frH
ffH
F7H EOX (End of Exclusive Message)
* If the device ID matches, or if 7FH is received, then when this command is received, the
location of the time code specified in the command data is located.
* MIDI phrases and pattern phrases are ignored when Dual Mono mode is selected.
AR-200_e.book 59 ページ 2003年7月14日 月曜日 午後1時11分
59


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland AR-200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland AR-200 in the language / languages: English as an attachment in your email.

The manual is 2,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info