512472
25
Zoom out
Zoom in
Previous page
1/60
Next page
25
Completing the Wire Fastening
Once complete, walk back along the perimeter and add in wire pegs to those areas of the wire
where it is not pulled down below the level of the grass tips and close to ground level. Wherever
the wire is raised or loose, it should be tightened and pegged down with extra wire pegs (distance
between pegs should be 0.5 to 1 meter (1.5-3 ft) in straight line and more when curved).
1.7 Setup in None-Base Zone
Note: Setup in a non-Base zone, which is not connected to the Base Station, requires a Perimeter
Switch (available as an accessory - see Chapter 7 - Accessories).
1.7.1 Perimeter Switch Location
Find a convenient spot outside the perimeter of the non-Base zone, but a location that is
relatively easy for you to access.
The Perimeter Switch must be mounted vertically in order to maintain its’ water resistance and
preferably in a dry and sheltered location.
Close to a wall socket (230V/120V) – the Perimeter Switch is supplied with an indoor power
supply (Figure 1.36).
1.7.2 Placing the Perimeter Switch
The Perimeter Switch connector is designed for quick and easy disconnection that allows you to
easily move the perimeter switch between plots.
The Perimeter Switch also comes with a large stake that fastens to its back, making transfer from
one plot to another easier by allowing you to disconnect the switch and move it with the stake still
attached (Figure 1.37).
Another option is to mount the Perimeter Switch onto a vertical surface, such as a wall or deck
railing. There are three small bosses on the back of the switch cover in order to mount it this way.
(Figure 1.38).
Figure 1.37
Perimeter Switch
with stake
attached
Squeeze the tabs
on both sides to
remove cover
Mounting the Perimeter Switch using
three mounting bosses on back cover
Figure 1.38
Figure 1.36
Perimeter Switch
Location
The Perimeter Switch MUST be
mounted vertically in order
to maintain its’ water resistance
Indoor Power
Supply
2 meters
low voltage
cable
Wires leading from the perimeter to the
Perimeter Switch are adjacent and touching.
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Robomow RM510 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Robomow RM510 in the language / languages: English as an attachment in your email.

The manual is 3,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Robomow RM510

Robomow RM510 User Manual - German - 60 pages

Robomow RM510 User Manual - Dutch - 60 pages

Robomow RM510 User Manual - French - 61 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info