Manual Robland S410 (page 53 of 98) (English, German, Dutch, French)

625584

Zoom out

Zoom in

1/98

52 V0114 SD410 - S410

Nederlands Français English Deutsch

Adjusting the cut of depth on the

thicknesser

(Fig.12)

The adjustment of the depth of cut is made by pushing both push buttons (1) for the rise and fall of the bed.

The height position of the thicknesser bed kan be read at the digital read out (2).

Fig.12

Calibrating of the digital read out (Fig.13)

It is highly reommmended that each time the planer knives are changed, the digital read out is

calibrated, this to avoid measurement errors.

Calibration is done as follows:

Set the thicknesser table at random height and thickness a sample; now measure exactly the thickness

of the sample.

Now the digital reat out has to be set at the same measure, and this can be achieved by

simustaneously the buttons F and SET in order to errase the stored values and set the reader at 0.

Now push both buttons F and Incr/Abs. Now the reader begins to count up at 3 progressive speed

rates.

- rate 1: at 1 Hz for 10 sec.

- rate 2: at 10 Hz for 10 sec.

- rate 3: at 1000 for as long the two buttons F and Inc/Abs are held.

Shortly before the desired value is reached, release the 2 buttons and press the same 2 buttons again

so as to approach the desired value with the slowest rate of 1 Hz.

Now the full stroke of the 250 mm of the thicknesser is calibrated.

Fig.13

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Robland S410 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 4,06 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Robland S410 Manual

Product: