Manual Robland S410 (page 51 of 98) (English, German, Dutch, French)

625584

Zoom out

Zoom in

1/98

50 V0114 SD410 - S410

Nederlands Français English Deutsch

Planer guard (Fig.7-8)

The planer guard above the cutter block and the planer fence is the so-called “ bridge type “, the

adjustment according to the workpiece is done manually.

The suspension system in the security ensures that, after the pressing down of the bridge to the table

surface, the bridge will automatically spring back up to the set height.

Place the bridge always about 10 mm above the table surface, so that the pusher can still be used, and

move the bridge so far sideways that only the workpiece can pass between the planer fence and the

bridge.

When planing, set the bridge to workpiece thickness using the knob.

Make sure the planer security always is in place at all planer operations,

and make sure that it is kept in good condition. If necessary, replace damaged parts of the safety

device.

Fig.7

Fig.8

Adjusting the planer depth cut (Fig.9)

Unlock the clamping handle (1).

By lifting up or pushing down the lever (2)

the depth of cut can be adjusted. The depth of cut can be read at the scale (3).

After setting is done, lock the clamping handle (1).

The maximum depth of cut is 8 mm.

Fig.9

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Robland S410 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 4,06 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Robland S410 Manual

Product: