625575
23
Zoom out
Zoom in
Previous page
1/65
Next page
22 V0913 E 300 / E 2800
English Deutsch
Problems: causes and solutions
The machine does not start when the start button is activated :
lower sawblade cover door is still open : close the door correctly
main fuse is switched off : power cut, power shortage or motor overload
star-delta switch in wrong position : put switch on “star” and start again
main switch off : put switch on “1” and start again
Reduction of speed when working :
belt tension not correct : tension the belt
motor overload due to incorrect feed rate : reduce the feed rate
blunt tools : sharpen tools
Vibration of the sawblade or arbor :
unbalanced tool : replace or have the tool balanced
worn or damaged belt : replace the belt
Thermal overload does not re-arm automatically after shut-off and cooling down
period :
overload is not set on automatic reset or the overload is faulty: set on automatic or replace the
overload protection
If you cannot solve the problem yourself or you do not nd your problem in this list, please contact
your Robland dealer.
Maintenance of the machine
The interior and exterior of the machine have to be cleaned regularly to avoid an accumulation of
dust and woodchips.
Any deposition of resin on the sliding table and other surfaces has to be removed.
Never smoke while cleaning the machine, and especially when using petrol, kerosene or other
inammable products. This could lead to an explosion and serious burns for the operator.
All moving parts have to be kept clean and have to be lubricated with a little very thin oil,
or penetrating oil such as WD40.
All bearings in the machine are double sealed and need no lubrication. The use of a dust
extraction system will most certainly extend the life of your machine.
The lifetime of the motors can be extended by blowing out sawdust from the cooling fan and motor
itself.
In particular the sliding table needs care and attention : see chapter operating the sliding
table.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Robland E300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Robland E300 in the language / languages: English, German as an attachment in your email.

The manual is 3,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Robland E300

Robland E300 User Manual - Dutch, French - 65 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info