625575
15
Zoom out
Zoom in
Previous page
1/65
Next page
14 V0913 E 300 / E 2800
English Deutsch
Settings of main and scorer sawblades
(Fig.12-13-14)
Height setting of main sawblade (g.12)
Main sawblade height setting is done by turning the handwheel (1).
One turn of this handwheel equals 2,5 mm of height setting.
In order to remove the mechanical play on the rise and fall spindle, always set the height
by rising the sawblade.
Height setting of the scorer sawblade (g.12)
The height setting of the scorer sawblade is done by turning the knob (2), and locking the serrated
knob. One turn of this height setting knob equals 3 mm.
The maximum cutting depth using a scorer sawblade diameter of 120 mm is 4,5 mm .
Tilting of the sawunit (g.13-14)
By turning the handwheel (1) the whole sawunit can be tilted and set at any angle between 90° and
45°. After setting, lock the sawunit in this position using the locking handle (2).The angle can be read
at the scale.
Both 45° and 90° positive stops are factory set and need no adjustment. After setting the
sawunit at the desired cutting angle the cutting depth of the scorer must be set again.
Lateral adjustment of the scoring blade
Each time the main sawblade is replaced by a new one, or even a newly sharpened sawblade, the
scorer has to be adjusted to match the main sawblade teeth width. It is very important that this is
done in the correct way to ensure a clean cut, free of splintering.
The use of two piece scoring saws is best because they can easily be adjusted using spacer rings.
The lateral movement of the scorer sawblade is achieved by turning the knob (g.12,2) and locking
the serrated knob.
Fig.13 Fig.14
3
2
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Robland E300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Robland E300 in the language / languages: English, German as an attachment in your email.

The manual is 3,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Robland E300

Robland E300 User Manual - Dutch, French - 65 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info