625575
13
Zoom out
Zoom in
Previous page
1/65
Next page
12 V0913 E 300 / E 2800
English Deutsch
Fig.8
Changing main sawblade and scorer
sawblade (Fig.8-9-10)
Before changing sawblades always turn off the main switch (g.6.1).
Handle saw blades with care, to avoid serious cuts and injuries.
The use off HSS saw blades is prohibited, use only carbide tipped saw blades.
The maximum diameter of the saw blades used on the machine is 315 mm.
Push the sliding table to the rear and open the saw cover (g.8). Raise the main sawblade to its
highest position and put the key(3) into the saw arbor nut.
Put the locking pin (g.9,2) in the opening of the sawtable and turn the arbor with the spanner untill
the locking pin (2) engages in the hole in the saw arbor pulley.
Now unlock the nut.Warning: the nut has a left thread, so loosen by turning the nut in the anticlockwise
direction. Before tting the new sawblade ensure the blade and anges are clean. This
prevents wobbling of the sawblade.
Never forget, after the saw arbor nut has been tightened, to remove the locking pin from the pulley
before starting up the motor.
The scorer saw blade is changed as follows : turn the scorer blade to the left and put the spanner
(g.10,1) onto the atened arbor. Loosen the bolt with the Allen
Fig.10
Fig.9
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Robland E300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Robland E300 in the language / languages: English, German as an attachment in your email.

The manual is 3,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Robland E300

Robland E300 User Manual - Dutch, French - 65 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info