520094

Robbe Futaba FX-40 Manual

29
Zoom out
Zoom in
Previous page
1/105
Next page
Curve set-up
FX-40
29
LINE = 17-POINT CURVE AND SPLINE = 17-POINT CURVE, ROUNDED
The methods of setting and adjusting the Line and Spline curves are identical; the
o
nly difference with the Curve variant is that the transitions at the points on the
Spline are mathematically rounded, producing a more harmonious shape. The
number of curve points suggested by the software varies between 3 and 9 points,
according to the Set-up menu in which the Line or Spline is called up; the curve is
initially displayed as a straight line.
The user is free to vary the number of points within the range 2 to 17 points by
adding or erasing individual points. The curve points are also variable in the verti-
cal (Y-axis) and horizontal (X-axis) directions.
For a simple symmetrical setting activate the “ Separate.” button field and select “
Combine.”.
MOVING THE POINTS IN THE VERTICAL DIRECTION (Y-AXIS)
Select a curve point using the cursor buttons (B), pr
ess the Rate button field, and
assign the desir
ed rate to that point using the control button field (A) or the 3-D
Hotkey.
OFFSET
The Offset setting is used to move the entire curve in the vertical direction. If the
of
fset value is up to 50%, the travel r
emains the same for both sides of neutral, but
if the value is any higher, the servo travel will be at its end-point at one extreme, so
the travel becomes increasingly asymmetrical.
ADDING A POINT (USING THE TRANSMITTER CONTROL)
• Activate the “Point” button field.
• Select a location on the curve using the transmitter contr
ol (blue cursor line) and
press the “Reset” button. The screen displays an “empty” point.
• Press the “Rate” button; this assigns a rate (Y-value) to the point corresponding
to the shape of the curve. The colour changes to pink.
• Alternatively you can assign a new rate within the range +150 to -150% using
the vertical control button fields (A).
ERASING A POINT
• Activate the “Rate” button field; the display in the button field changes to
“Delete”.
• Select the point to be erased using the horizontal control buttons (B) (colour
changes fr
om gr
een to pink).
• Press the “Delete” button; the assigned rate for this point is erased, and an
“empty” point appears on the screen.
You now have two options:
1. Assign a new, different rate to the point using the control button field A.
2. Delete the point completely; for doing that, jump to the next point (control but-
tons B).
ADDING A POINT (USING THE CONTROL BUTTONS)
It is also possible to add a new point using the button fields:
• Activate the “Rate” button field.
• Select a curve point close to the new desired position using the contr
ol buttons
(B) (colour changes from green to pink).
• Move the point on the curve using the control buttons (C) (cursor display chan-
ges to an “empty” point).
• Press the “Rate” button; this assigns a rate (Y-value) to the point corresponding
to the shape of the curve. The colour changes to pink.
• Alternatively assign a new rate within the range +/-150% using the control but-
ton field (A).
(A)
(A)
(B)
(B)
(C)
… 29 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Robbe Futaba FX-40 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Robbe Futaba FX-40 in the language / languages: English as an attachment in your email.

The manual is 3,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Robbe Futaba FX-40

Robbe Futaba FX-40 User Manual - German - 105 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info