520097

Robbe Futaba FF-10 Manual

59
Zoom out
Zoom in
Previous page
1/119
Next page
59
Snap Rolls at the fl ick of a switch (
SNAP-ROLL
) (
ACRO
):
This function allows you to execute snap rolls by fl ipping a switch, providing
the same input every time. It also removes the need to change dual rates on the
3 channels prior to performing a snap, as
SNAP-ROLL
always takes the servos to
the same position, regardless of dual rates, inputs held during the snap, etc.
Note: Every aircraft snaps differently due to its C.G., control throws, moments, etc. Some models snap without aileron;
others snap on elevator alone. Most models snap most precisely with a combination of all 3 surfaces. Additionally, rate of
speed and acceleration when using the snap switch will affect how the model snaps. For information on using gyros with
airplanes for cleaner precision maneuvers, such as snaps and spins without over rotation, see p. 74.
Adjustability:
• Travel: Adjust the amount of elevator, aileron and rudder travel automatically applied.
• Range: -120 to +120 on all 3 channels. Default is
100%
of range of all 3 channels.
• Directions: Up to 4 separate snaps may be set up, one for each of the 4 direction choices (up/right, down/right, up/left,
down/left). Each snap is fully adjustable regarding travels and direction on each of the 3 channels.
Note: for simplicity, the radio refers to snaps that use “UP” or positive elevator as “U” or “UP” snaps. This is more
commonly referred to as a positive or inside snap. “D” or “DOWN” snaps are more commonly referred to as negative or
outside snaps.
•
R/U
= Right positive
R/D
= Right negative
L/U
= Left positive
L/D
= Left negative snap roll
• Assignment of the 2 switches (
DIR-SW1/2
) to change snap directions is fully adjustable and optional. If you wish to have
only one snap, leave the switches as
NULL
. (If assigned,
SW1
= up/down,
SW2
= left/right.)
• Caution: it is critical that you remember if you assigned switches to select the three additional snaps.
• For example, assign SWITCH A for U/D snap direction, and then also assign SWITCH A for elevator dual rates.
While fl ying on elevator low rate (SWITCH A DOWN) you pull your snap SWITCH. The model will:
•use the throws set in the snap programming (the low rate elevator has no effect); and
•be a down (negative/outside) snap, not an up (positive/inside) snap.
•Both of these may come as a great surprise and risk crashing if you are unprepared.
• Safety Switch (
SAFE-MOD
): a safety may be set up on your landing gear SWITCH, preventing accidental snap rolls while
the landing gear is down. The safety switch is turned on and off with the landing gear SWITCH.
•
ON
: the safety mechanism is activated when the landing gear SWITCH is in the same position as at the time this
feature is changed to
ON
. Snap rolls will not be commanded even if the snap roll SWITCH is turned on with the
gear SWITCH in this position. When the landing gear SWITCH is moved to the opposite position, snap rolls may
be commanded.
•
OFF
: activates the safety mechanism in the opposite position from the
ON
function.
•
FREE
: the safety mechanism is completely turned off. Snaps can be commanded regardless of the gear SWITCH
POSITION.
Note: The location of the safety switch always follows channel 5. If channel 5 is reassigned to switch C, for
example, switch C is now the safety. If channel 5 is nulled or used as the second aileron servo, the safety function
will not be available.
• Trainer Safety:
SNAP-ROLL
is automatically disabled when the trainer function is activated.
… 59 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Robbe Futaba FF-10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Robbe Futaba FF-10 in the language / languages: English as an attachment in your email.

The manual is 1,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Robbe Futaba FF-10

Robbe Futaba FF-10 User Manual - German - 92 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info