10
The following additional accessories are available from your dealer. Refer to a Futaba catalog for more information:
• CAMPac Memory module - the optional DP-16K/64K/128K CAMPac increases your model storage capability (to
19/31/48 models from 15) and allows you to transfer programs to another 10C transmitter. Note that data cannot be
transferred to/from any other model of transmitter (i.e. 8U, 9Z, etc).
However, CAMPac which saved the data of T9C/T9CS transmitter is convertible for the data of this 10C transmitter. See
p.17 for the conversion method.
Insertion of a CAMPac containing data of a different transmitter type (ex: 9Z) will result in a complete
CAMPac data reset and loss of all data.
• NT8S Transmitter battery pack - the (700mAh) transmitter Ni-Cd battery pack may be easily exchanged with a fresh one
to provide enough capacity for extended fl ying sessions.
• Trainer cord - the optional trainer cord may be used to help a beginning pilot learn to fl y easily by placing the instructor
on a separate transmitter. Note that the 10C transmitter may be connected to another 10C system, as well as to many other
models of Futaba transmitters. The 10C transmitter uses the newer rectangular type cord plug. Both new-to-new and new-
to-round plug style trainer cords are available.
• Neckstrap - a neckstrap may be connected to your T10C system to make it easier to handle and improve your fl ying
precision, since your hands won’t need to support the transmitter’s weight.
• Y-harnesses, servo extensions, etc - Genuine Futaba extensions and Y-harnesses, including a heavy-duty version with
heavier wire, are available to aid in your larger model and other installations.
• 5-cell (6.0V) receiver battery packs - All Futaba airborne equipment (except that which is specifi cally labeled otherwise)
is designed to work with 4.8V (Ni-Cd 4 cells) or 6.0V (Ni-Cd 5 cells or alkaline 4 cells). Using a 6.0V pack increases the
current fl ow to the servos, which accelerates their rate of response and their torque. However, because of this faster current
draw, a 5-cell battery pack of the same mAh rating will last approximately 3/4 the time of a 4-cell pack.
• R319DPS/R3110DPS - Synthesized receiver which can be changed to any 72MHz frequency with the turn of 2 dials, no
tuning needed.
• Gyros - a variety of genuine Futaba gyros are available for your aircraft or helicopter needs. See p.73 for aircraft or p.
107 for helicopter gyro information.
• Governor (GV1) - for helicopter use. Automatically adjusts throttle servo position to maintain a constant head speed
regardless of blade pitch, load, weather, etc. See p. 108 for details.
• DSC Cord - allows setup and testing without transmitting. Requires DSC compatible receiver (R1410DP, R319DPS,
R3110DPS or R6014FS) and DSC cord. With Transmitter and Receiver off, plug cord into trainer port then, into receiver
DSC slot. All programing and setup may be done in this manner without transmitting.
• TP-72 FM modules - additional modules on other frequencies within the 50MHz (licensed operators only) and 72 Mhz
bands may be purchased to utilize your transmitter with receivers on other frequencies.
• Receivers - various models of receivers may be purchased for use in other models. (See p. 8.)
