592291
5
Zoom out
Zoom in
Previous page
1/12
Next page
English English 5 6
COOKING TIMER
1. In standby mode, press and hold TIMER BUTTON (11), the minute digits will
flash. Press VOLUME -/+ BUTTON (16)/(17) on unit or on remote repeatedly
to set the timer to the desired time (the display will run up from 1 minute to
120 minutes maximum), press TIMER BUTTON (11) to confirm.
2. Then the volume digits will flash, press VOLUME -/+ BUTTON (16)/(17) on
unit or on remote repeatedly to set the desired volume, press TIMER BUT-
TON (11) again to confirm.
3. The timer will start the countdown. Once countdown was arrived, bee tone
sound will coming. You can stop it by pressing one more time TIMER BUT-
TON (11) on unit or remote.
TURNING ON THE UNIT
Press STANDBY BUTTON (15) on unit or remote control, then press FUNCTION
BUTTON (14) on unit or on remote control to choose FM / CD / USB / AUX mo-
del.
VOLUME ADJUSTING
Press VOLUME -/+ BUTTON (16)/(17) on unit or on remote control to increase or
decrease volume.
TUNING RADIO STATIONS
1. Press FUNCTION BUTTON (14) on unit or remote control to select the desi-
red wave band FM.
2. Press 3 seconds SKIP BACK/UP / TUNING -/+ BUTTONS (4)/(5) to start the
Radio auto-tuning function (the unit will search automatically the strongest
stations).
3. To search manually a Radio station, when in radio mode press SKIP BACK/
UP / TUNING -/+ BUTTONS (4)/(5) sequentially until the desired frequency
is displayed.
4. To turn off the radio, press FUNCTION BUTTON (14) to switch to other func-
tions or press STANDBY BUTTON (15) to turn off the unit.
DAB AUTO SCAN
The auto scan will search for the entire DAB Band III channels. After the scan
has finished, the first alphanumerically found station will be automatically selec-
ted.
1. To activate auto scan press PLAY/PAUSE/SCAN BUTTON (2), the display
will show “Searching …” and a progressing slide bar.
2. All the stations that have been found will be stored automatically, to explore
and select listening to the found stations, repeatedly press SKIP BACK/UP /
TUNING -/+ BUTTONS (4)/(5).
DAB DISPLAY MODES
Every time you press P.MODE/INFO BUTTON (9), the display will cycle through
the following display modes:
Programme type
This describes the style of the programme that is being broadcast. If the informa-
tion is not available, the display will show “<Program Type>”.
Ensemble/Multiplex (Group name)
The Ensemble/Multiplex is a collection of radio stations that are bundled and
transmitted together in a single frequency. There are national and local multiple-
xes, local ones contain stations that are specific to that area.
Frequency
The frequency of the present station will be displayed.
Audio bit rate
The display will show the digital audio bit rate being received.
Signal strength
The display will show a slide bar to indicate the signal strength, the stronger the
signal, the longer the bar will be from left to right.
DLS
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roadstar CLR-2950DAB plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roadstar CLR-2950DAB plus in the language / languages: English, German as an attachment in your email.

The manual is 0,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info