592190

Roadstar CLR-2860UMP Manual

6
Zoom out
Zoom in
Previous page
1/20
Next page
6
MMI of CLR-2860UMP
___________________________________________________________________________________________________________
2.7 How to set Dimmer Timer / Start Time:
2.7.1 The device could let user to select starting time if they want
2.7.2 Press <Mode|Stop > for 7 times into dimmer switch mode, the display show DT START and 23:00
alternative, press “UP” or “DOWN” to select start time
2.8 Set Dimmer Timer stop time
The device could let user to select starting time if they want.
Press <Mode|Stop > for 8 times to setting end time of Dimmer timer, at the moment,
display show DT STOP and 06:00 alternative,
Press “Down” or “UP” to select end time of timer
2.9 How to set 12/24 hour mode:
2.9.1 Press <Mode|Stop > for 8 times to set up clock display mode and default is 24 hours
2.9.2 Press <UP> once to change 24 hour and “24” goes solid
2.9.3 Press <Down> once to change 12 hour and “12” goes solid.
2.9.4 Press <Mode> once to confirm the current setting and it switches to set the update setting mode.
2.9.5 Press other key to start its corresponding function.
2.9.6 When no key has been pressed for 10 seconds, the current setting is confirmed and it switches to
auto-run mode automatically.
2.10 Alarm Setting:
2.10.1 Press <AL 1~2> once, ‘Alarm1~2 goes solid in the Alarm section. The current setting of HH:MM and
the type of alarm goes flashing
2.10.2 Press <UP> to advance the setting by 1 minute
2.10.3 Press <Down> to move the setting back by 1 minute
2.10.4 Press and hold <UP> or <Down> to change the setting in fast mode of 10 minutes per step
2.10.5 Press <Timer> to change the type of alarm between daily (Su Mo Tu We Th Fr Sa ), weekend (Su
Sa )and weekday ( Mo Tu We Th Fr) , which are reflected by the 7 day-flags.
2.10.6 Press and hold <Timer> enter the single day mode (Su ) will show on display; press <Timer> to
select the day and the corresponding week goes solid. Press and hold <Timer> again to exit.
2.10.7 Press same alarm key, which is <AL1~2>, once to select the output format of the alarm
Output format LCD display
Beep sound ‘Bell’ symbol goes solid
Radio output ‘Radio’ symbol goes solid
CD output CD icon goes solid
Disable All the ‘Bell’ and ‘Music’ are cleared
2.10.8 Press other key to start its corresponding function
2.10.9 CD & Radio will walk for 60 Minutes, Buzzer only for 10 Minutes
2.10.10 When no key has been pressed for 10 seconds, the system goes back to auto-run mode
2.11 Cooking Timer Value Preset:
2.11.1 There are 6 preset Cooking timer
2.11.2 Press <Timer> once to enter the timer mode.
2.11.3 Press <UP> or <DOWN> to adjust the value (from 1 minute to 23hours and 59minute). press
<MEM> again to store it value.
2.11.4 Once <MEM> press, the ‘T’ goes flash. Press Preset + or preset - select location would be
save ‘T1 ~ T6 ’ goes solid, press <MEM> to confirm it.
2.11.5 Similar to < T 1>, repeat same step to select the desired cooking timer preset memory.
2.12 AOT (Automatically Off Timer):
2.12.1 When device stay in standby , press “AOT” button to tune on radio and AOT function will active
2.12.2 Once “AOT” was press, The current AOT value should show on display, press the key every time will change each 10
minutes, value of timer since 10 to 90 minutes maximum .
2.12.3 The function will automatically start if not any key press for 10 seconds
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roadstar CLR-2860UMP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roadstar CLR-2860UMP in the language / languages: English, German as an attachment in your email.

The manual is 0,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info